ABRACS Filament Brush - WB174

Name: ABRACS Filament Brush - WB174
Brand: ABRACS
SKU: kjmgnhix3a
Price: 8.75 GBP
Availability: InStock

Non-spark filament strip brush impregnated with abrasive grain. Ideal for deburring, surface treat...

Best current price£8.75from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

eBay£8.75Visit shop

ABRACS Filament Brush (Non Spark) - WB174

Visit shop

One Offer

1 offer from £8.75

View price history by clicking the chart icon.

eBayABRACS Filament Brush (Non Spark) - WB174

Free delivery in 1–3 days

£8.75

Visit shop

Product Information

Full details

The ABRACS Filament Brush (WB174) is a professional-grade abrasive tool designed for metalworkers, woodworkers, and surface refinishing specialists who require a non-sparking solution for deburring and cleaning. Its primary benefit lies in the specialized abrasive-impregnated filaments that provide consistent stock removal without damaging the base material, though users should note that the 4,500 RPM maximum speed limitation necessitates careful control when paired with high-speed power tools.

All features

Model Part Number	NYENDRED
Brand	ABRACS

Extended Product Information

FAQs

Can I use this brush on stainless steel?

Yes, because the filaments are non-sparking and synthetic, it is safe to use on stainless steel without risking cross-contamination from carbon steel particles.

What happens if I exceed 4,500 RPM?

Exceeding the maximum RPM will cause significant heat generation, leading the nylon filaments to melt or deform, which will destroy the brush's effectiveness.

Is this tool suitable for deep rust removal?

The WB174 is better suited for light surface cleaning and deburring. For deep or heavy rust, a steel wire brush is typically more effective.

Does the brush come in different grit sizes?

This specific model (WB174) features a specific grit profile standard to the ABRACS filament line; check the packaging for specific grit classification.

Can this be used on a bench grinder?

It is not recommended, as most bench grinders operate at speeds well above 4,500 RPM. Always verify your tool's speed before mounting.

Troubleshooting

Filaments are melting or fraying prematurely

Reduce the tool speed to remain within the 4,500 RPM limit and reduce the amount of downward pressure applied.

Brush is slipping in the drill chuck

Ensure the 6mm spindle is fully inserted into the collet or chuck and tightened firmly. If it continues to slip, check that the chuck jaws are not worn.

Poor material removal rate

Check if the abrasive grain has been loaded with debris; clear it by running the brush against a sacrificial piece of material or use a stiff-bristle brush to clean the filaments.

Pros and Cons

Pros

Non-sparking design improves safety in industrial settings
Effective at deburring without stripping away excess base material
Compatible with most standard drills and die grinders
Durable filament structure maintains its shape longer than traditional wire brushes

Cons

Limited to a maximum of 4,500 RPM
Not intended for heavy-duty rust removal compared to steel wire brushes
Requires proper RPM management to avoid premature filament melting

Setup, Compatibility & Care

To set up the ABRACS WB174, insert the 6mm spindle into the collet or chuck of your power tool and ensure it is tightened securely. Before starting the motor, verify that your tool's speed setting is adjusted below the 4,500 RPM threshold; operating above this limit will cause the filaments to fray or melt due to heat buildup. To maximize the life of the brush, avoid excessive side-loading or forcing the brush into the material. After use, store the brush in a cool, dry place to prevent the abrasive-impregnated filaments from becoming brittle. Periodically inspect the brush for missing or heavily matted filaments; if significant degradation is observed, replace the unit to maintain consistent surface finish results.