Abracs Nylon Filament Wheel Brush - 75mm - WB171
Best current price£9.28from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£9.28Visit shop ABRACS Filament Brush (Non Spark) - WB171
Visit shopeBay£9.28Visit shop One Offer
1 offer from £9.28
View price history by clicking the chart icon.
Product Information
Full details
The Abracs Nylon Filament Wheel Brush (WB171) is designed for professional tradespeople and industrial users who require a versatile, non-sparking tool for surface preparation tasks. It excels at deburring, cleaning, and light stock removal on a variety of materials without the risk of scratching or marring delicate surfaces, though it is limited to a maximum speed of 4,500 RPM, requiring careful regulation of power tool settings.
All features
| Model Part Number | WB171 |
|---|---|
| Brand | ABRACS |
Extended Product Information
FAQs
Can I use this on metal surfaces?
Yes, it is excellent for deburring and cleaning metal surfaces, especially where you want to avoid the scratching caused by metal wire brushes.
What is the maximum RPM for this brush?
The maximum rotation speed is 4,500 RPM. Do not exceed this limit for safety reasons.
Does this brush cause sparks?
No, the nylon filament construction is non-sparking, making it safer for use near flammable materials.
What tools can I use this with?
The brush is compatible with any standard electric drill or die grinder capable of accepting a 6mm spindle.
Is this suitable for heavy rust removal?
It is suitable for light to medium surface cleaning and rust removal, but it is not intended for heavy-duty grinding of thick rust or slag.
How do I store the brush?
Store in a cool, dry place away from direct sunlight or heavy items that could crush the filaments.
Troubleshooting
Filaments are fraying prematurely
Reduce pressure and ensure the tool speed does not exceed 4,500 RPM.
Brush leaves residue on workpiece
The material being removed is likely loading the brush; clean the brush by running it briefly against a coarser scrap material to clear the debris.
Excessive vibration during use
Ensure the brush is centered correctly in the chuck and that the spindle is not bent.
Pros and Cons
Pros
- Non-sparking construction ensures safety in hazardous work environments
- Abrasive-impregnated filaments provide long-lasting cutting performance
- Flexible bristles allow for cleaning irregular shapes and contours
- Easy to install on standard 6mm collets or drill chucks
- Durable build quality suitable for industrial-grade tasks
Cons
- Strict 4,500 RPM maximum speed limit may be lower than many high-speed die grinders
- Not intended for heavy-duty metal grinding or deep weld removal
- Filaments can degrade if used on extremely sharp edges or burrs for prolonged periods
Setup, Compatibility & Care
To set up, insert the 6mm spindle firmly into your tool's collet or drill chuck and tighten securely. Always verify your tool's speed settings; ensure the device is set to, or capped at, 4,500 RPM before starting. During use, avoid side-loading the wheel to prevent excessive bending of the bristles. After operation, inspect the wheel for debris accumulation and store it in a dry location to maintain the integrity of the abrasive filaments.
Similar items
Abracs Filament Brush - WB172From £9
Abracs Wire Wheel Brush - 75mmFrom £15
Abracs Wire Brush with Arbor 75mm Steel - 75mmFrom £10
Abracs Wire Brush - 50mmFrom £10
Abracs Spindle Abrasive Mounted Poly Wheel Brush - 100mm x 13mm x 6mm - WB3050From £13
ABRACS Filament Brush - WB174From £9
Abracs Twist Knot Wheel Brush - 75mm - 0.5 Wire Gauge - 12,500 RPMFrom £12
Dan Carter Supertee King Rugby Kicking Tee - UTCS916From £21
Dan Carter Kicking Tee - Supertee KingFrom £15
Kitchen Roll Holder - WhiteFrom £13
Vileda Supermocio Micro & Cotton Mop - RedFrom £8
Buffing Wheel Pads - B&QFrom £13