Best current price£0.53from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£0.53Visit shop Fandf Coach Screws M6 X 30Mm 10Cs630 (Bag 10)
Visit shop
Amazon£2.66Visit shop ForgeFix Coach Screws | M10 x 70mm | Zinc Plated | Bag 10
Visit shop54 offers from £0.53 - £13.36
View price history by clicking the chart icon.
This guide is for construction professionals and DIY enthusiasts needing secure and robust fastening solutions. The Forgefix M12 x 40mm Coach Screw offers a strong, single-thread design with zinc plating for durability, ideal for various assembly applications. A key consideration is ensuring the correct pilot hole size for optimal grip.
| Colour | Silver |
|---|---|
| Model Part Number | 5CS1240 |
| Brand | Forgefix |
M12 coach screws are designed for heavy-duty applications requiring strong and secure fastening in timber and dense materials, such as structural joinery or attaching significant hardware.
No, a standard wrench or socket set that fits the M12 hexagon head is sufficient for driving these screws.
The zinc plating provides a protective layer that resists corrosion and rust, extending the lifespan of the screw, especially in outdoor or damp conditions.
While often used interchangeably, a coach screw typically has a hexagon head, whereas a lag screw may have a hex or slotted head. Both are designed for fastening into wood.
These coach screws are not designed for direct use in concrete. For masonry or concrete, you would typically use concrete screws or anchor bolts with appropriate fixings.
The pilot hole size depends on the material's density. For hardwoods, a larger pilot hole is generally recommended than for softwoods to prevent splitting and ensure optimal thread engagement.
This Forgefix coach screw has an M12 thread size and a length of 40mm.
Ensure the pilot hole is drilled to the correct diameter for the material. If the material is very dense, a slightly larger pilot hole may be needed. Check for debris in the pilot hole.
Use a properly sized socket or wrench. Apply steady, even pressure. If the head is already damaged, it may be necessary to remove the screw using pliers or a screw extractor.
Verify that the correct pilot hole size was used. If the material is too soft or crumbly, the screw may not achieve adequate grip. Consider using a larger screw or appropriate anchors.
Setup: To use the Forgefix Coach Screw, a pilot hole of appropriate diameter must be drilled into the material. The recommended pilot hole size will vary depending on the density of the material. Use a wrench or socket set to drive the screw, ensuring it is tightened firmly without overtightening.
Compatibility: These coach screws are primarily designed for use in wood, timber, and other dense construction materials. They can also be used with appropriate wall plugs or anchors in masonry for specific applications. Ensure the hexagon head is compatible with your chosen driving tool.
Care: The zinc-plated finish offers good protection against corrosion. For extended outdoor use or in highly corrosive environments, consider additional protective coatings or alternative materials. Keep screws stored in a dry place to prevent premature rusting.
