PlastiKote Trim Spray Paint - High Gloss White

This 'next gen' formulation is designed for application on almost all surfaces, including wood, metal, uPVC, and previously painted items. Always test on a small, inconspicuous area first if you are unsure.

The paint is touch dry in approximately 10-15 minutes, but drying times can vary based on temperature, humidity, and application thickness. Allow longer for recoating.

Yes, the paint provides a durable, scratch-resistant finish suitable for exterior trim applications like window sills.

While the paint is designed for direct application on many surfaces, priming is recommended on bare or problematic surfaces (like very porous wood or metal prone to rust) to ensure optimal adhesion and finish.

Clean the nozzle immediately after use by inverting the can and spraying until clear. Any paint on tools or skin should be cleaned with a suitable solvent before the paint dries.

This specific variant provides a High Gloss White finish.

The MPN for this specific product is 071007.

Shake the can more vigorously for longer. Ensure the nozzle is clear by spraying a test surface. If the issue persists, the can may be faulty.

You may have applied the paint too thickly or from too close. Apply thinner coats and ensure an appropriate distance from the surface. Allow sufficient drying time between coats.

The surface may not have been properly prepared (e.g., not clean, greasy, or dusty). Ensure the surface is thoroughly cleaned and dry before application. Light sanding can improve adhesion.

Ensure the can was shaken adequately to mix the gloss components. Apply additional thin, even coats if necessary.