PlastiKote Quick Dry Acrylic Spray Paint - Gloss White 400ml

While touch-dry in 10 minutes, full curing can take 24-48 hours depending on temperature and humidity. Avoid heavy use or cleaning until fully cured.

This product is designed for hard surfaces like wood, metal, plastic, glass, and stone. It is not recommended for use on fabric or textiles.

One 400ml can provides coverage of up to approximately 1.75 square meters, depending on the surface and application thickness.

A primer is recommended for bare or porous surfaces like raw wood or metal, and for achieving the best adhesion and finish. Always test on an inconspicuous area first.

Yes, the paint provides resistance to chemicals and weather influences, making it suitable for outdoor items.

Store the can upright in a cool, dry place, away from sources of ignition, direct sunlight, and extreme temperatures.

Yes, provided the existing paint is sound and clean. Lightly sand glossy surfaces for better adhesion. Always test in a small area first.

Shake the can more vigorously. Ensure the nozzle is not clogged by turning the can upside down and spraying briefly to clear. Hold the can at the recommended distance (approx. 25-30cm) and use smooth, even strokes.

Ensure the surface was properly prepared: clean, dry, and free of contaminants. If painting over a glossy or slick surface, a primer might be needed. Check if the surface is compatible with acrylic paints.

Apply paint in thin, even coats rather than one heavy coat. Maintain a consistent distance from the surface and use steady, overlapping strokes. If runs occur, allow to dry and gently sand down before reapplying thin coats.

Turn the can upside down and spray for a few seconds to clear the nozzle. If this doesn't work, carefully remove the nozzle and soak it in warm water or a suitable solvent, then dry thoroughly before reattaching.