Stiga Combi 753 S Self-Propelled Petrol Lawn Mower

The Stiga Combi 753 S requires fresh, unleaded petrol. Always refer to the owner's manual for the specific octane rating and any additives recommended.

It is recommended to change the engine oil annually or after a specified number of operating hours, as detailed in the engine's operation manual. Always check the oil level before each use.

It is generally best to mow dry grass. Mowing wet grass can lead to clumping, reduced cutting quality, and inefficient collection or mulching. It can also be more hazardous.

Mulching finely shreds grass clippings and returns them to the lawn as natural fertilizer, enriching the soil with nutrients and helping to retain moisture. It also reduces the need to dispose of clippings.

The cutting height is adjusted centrally using a single lever located near the rear wheel. Move the lever to the desired position (ranging from 22 mm to 80 mm) according to your lawn's needs.

The cutting blade should be inspected regularly for sharpness and damage. For optimal performance, it should be sharpened at least once a season or replaced if significantly worn or bent. Always disconnect the spark plug before inspecting or maintaining the blade.

The Stiga Combi 753 S typically includes the mower, a 60-litre hybrid grass collector, a mulching plug, and a side deflector. Please check the product packaging for exact contents.

Check fuel level, ensure fresh fuel is used, check spark plug connection, ensure the primer bulb has been pressed (if applicable), and verify the choke is set correctly. If issues persist, consult the engine manual for specific troubleshooting steps.

Ensure the drive cable is correctly engaged and tensioned. Check for any obstructions around the drive belt or pulleys. The self-propel mechanism may require professional inspection if these steps do not resolve the issue.

Ensure the cutting blade is sharp and free from damage. Adjust the cutting height to a higher setting if the grass is too long or dense. Clean any grass buildup from the mower deck.

Ensure the grass collector is properly attached and not overloaded. Check for blockages in the discharge chute. If mulching, ensure the mulching plug is fully inserted. Trim grass more frequently.

This could indicate a damaged or unbalanced cutting blade. Stop the mower immediately, disconnect the spark plug, and inspect the blade. If damaged, it needs to be replaced.