Stiga Twinclip 950 S Self-Propelled Petrol Lawn Mower

Use clean, fresh unleaded petrol. Do not use E10 fuel if your engine is not specifically rated for it. Always refer to your engine manual for specific fuel recommendations.

Oil change intervals depend on usage but typically recommended annually or after a specified number of operating hours. Consult your STIGA engine manual for precise guidance.

While the mower can handle damp conditions, it is generally recommended to mow when the grass is dry for optimal cutting and collection results. Wet grass can clog the deck and reduce collection efficiency.

The XC system combines an innovative blade design with a specifically engineered hybrid chassis to maximize the airflow and efficiency of grass collection into the grassbag.

The mower supports three modes: Collecting (gathers clippings into the 70L bag), Rear Discharge (drops clippings behind the mower), and Mulching (finely chops clippings and returns them to the lawn as fertilizer).

The cutting height is adjusted centrally using a lever, offering seven positions from 25 mm to 77 mm. This allows you to tailor the cut to your lawn's needs and season.

The premium White Glove delivery service includes professional setup and inspection by an authorized STIGA dealer, delivery at your convenience, and a demonstration of the mower's features and safe operation.

Ensure there is fresh fuel in the tank, the spark plug is correctly connected, and the choke is set appropriately. Check that the oil level is adequate and that the fuel cap is not blocked.

Check if the cutting blade is sharp and free from damage. Ensure the cutting height is set correctly and that the grass collector is not overfilled or blocked.

Verify that the drive control lever is engaged and that there are no obstructions preventing the drive mechanism from operating. Check the drive belt for tension and condition.

Stop the engine immediately and inspect the cutting blade for balance issues or damage. Ensure the blade is securely fastened. Check for any loose parts on the mower.

Empty the grass collector and ensure the discharge chute is not blocked. Clean the underside of the mower deck. Consider using the mulching or rear discharge options if collecting is proving difficult.