Setup, Compatibility & Care
Setup
Getting started with Gorilla Glue is straightforward but requires attention to preparation for the best results.
- Surface Preparation: Ensure all surfaces to be bonded are clean, dry, and free of any contaminants like dirt, dust, oil, or grease. For optimal activation, a slightly damp surface is beneficial for one of the materials.
- Personal Protection: Always wear gloves to prevent direct skin contact. Gorilla Glue will stain skin and is difficult to remove once cured.
- Ventilation: Work in a well-ventilated area.
Compatibility
Original Gorilla Glue is highly versatile and forms strong bonds with:
- Wood
- Stone
- Metal
- Ceramic
- Foam
- Glass
- And virtually anything else.
Care & Storage
- Cleanup: Wipe away any wet excess glue immediately with a dry cloth or, for tougher messes, use mineral spirits or paint thinner. Once cured, the glue is very difficult to remove and may require mechanical removal (scrapping, sanding).
- Bottle Care: After each use, wipe the bottle nozzle clean and tightly replace the cap to prevent air exposure, which can cause the glue to cure in the bottle.
- Storage: Store in a cool, dry place away from direct sunlight and out of reach of children and pets. For extended shelf life, consider storing with a desiccant or in a sealed container to minimize moisture exposure.
Safety Information
- Skin Contact: Avoid contact with skin. Wear gloves. If contact occurs, wash thoroughly with soap and water immediately. Cured glue on skin will gradually wear off, but it will stain.
- Eye Contact: In case of eye contact, flush with water for 15 minutes and seek medical attention.
- Ingestion: Do not ingest. If ingested, call a poison control center immediately.