Shopping.co.uk

Drybase TS-Plus Tanking Slurry - FG-A00324-001

Drybase TS-Plus Tanking Slurry - FG-A00324-001

Drybase TS-Plus Tanking Slurry is a pre-bagged, ready-to-mix cementitious waterproofing slurry des...

Best current price£34.99from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
B&Q£34.99Visit shop

B&Q - Ts-Plus Tanking Slurry (20Kg) Cementitious Waterproofing Internal/external Damp-Proofing Treatment Frost/heat-Resistant

Visit shop

All Offers

4 offers from £34.99

View price history by clicking the chart icon.

B&QB&Q - Ts-Plus Tanking Slurry (20Kg) Cementitious Waterproofing Internal/external Damp-Proofing Treatment Frost/heat-Resistant
Free delivery in 1–3 days
£34.99
Visit shop
OnBuy.comDrybase Ts Plus Tanking Slurry 20Kg 5060132768235
Free delivery in 1–3 days
£34.99
Visit shop
Robert DyasDrybase TS-PLUS Tanking Slurry 20kg Grey Waterproofing Treatment
£2.95 delivery
£34.99
Visit shop

Product Information

Full details

This guide is for anyone using Drybase TS-Plus Tanking Slurry to waterproof concrete and brick surfaces. The key benefit is its ability to create a waterproof barrier, even under pressure, for both above and below ground applications. However, proper application, including surface preparation and allowing sufficient drying time between coats, is crucial for optimal performance. This guide will help you understand how to effectively use Drybase TS-Plus for various waterproofing needs.

All features

Model Part NumberFG-A00324-001
BrandDrybase

Extended Product Information

FAQs

What surfaces can I apply Drybase TS-Plus to?

Drybase TS-Plus is designed for application on concrete and brick surfaces, both above and below ground.

How many coats of Drybase TS-Plus are required?

Two coats are recommended for optimal waterproofing performance.

How long should I wait between coats?

Allow 2-4 hours between coats for proper drying and adhesion.

Can I apply Drybase TS-Plus in cold weather?

It is best to avoid applying in extreme temperatures. Check the product's technical data sheet for specific temperature recommendations.

Is Drybase TS-Plus suitable for use in a swimming pool?

Drybase TS-Plus is not specifically designed for use in swimming pools. Its primary use is for foundations and damp proofing.

What should I do if the surface is salt-contaminated?

Drybase TS-Plus is designed to adhere to salt-contaminated surfaces. However, ensure proper surface preparation to maximize adhesion.

How do I clean the tools after use?

Clean tools with water immediately after use, before the slurry dries.

Troubleshooting

Slurry is not adhering properly.

Ensure the surface is clean, free of loose particles, and properly prepared before application. Also, check the product's expiration date.

The coating is cracking after application.

Ensure that the slurry is applied in the correct thickness. Cracking may also indicate movement in the substrate; address any structural issues.

Water is penetrating the coating.

Ensure that the coating is applied in two full coats, and that there are no gaps. Check for pinholes and apply another layer if needed.

Slurry is difficult to apply.

Ensure the slurry is mixed to the correct consistency according to the manufacturer's instructions. Adjust water if necessary.

Pros and Cons

Pros

  • Provides a reliable waterproofing solution for various applications.
  • Bonds effectively to damp surfaces, which can save time and effort during preparation.
  • Offers excellent resistance to both active and passive water pressure.
  • Can be used in a wide range of settings, including basements, garages, and damp rooms.
  • Easy to apply, with simple instructions and a manageable application process.

Cons

  • Requires careful surface preparation for optimal bonding.
  • Needs sufficient drying time between coats, which can extend project timelines.
  • Application in very cold or hot temperatures may impact performance.
  • Spray application may require specialized equipment.
  • Improper application can lead to leaks and reduced effectiveness.

Setup, Compatibility & Care

  1. Surface Preparation: Ensure the surface is clean, sound, and free from loose particles, dust, and oil. Any existing coatings or contaminants must be removed.
  2. Mixing: Mix the Drybase TS-Plus with clean water according to the manufacturer's instructions to achieve a workable consistency.
  3. Application: Apply the first coat evenly using a brush, roller, or spray, ensuring complete coverage. Allow it to dry for 2-4 hours.
  4. Second Coat: Apply the second coat, ensuring it covers the first coat completely. Proper application is crucial for creating a continuous waterproof membrane.
  5. Curing: Allow the slurry to cure completely before exposing it to water or backfilling.

Compatibility: Drybase TS-Plus is compatible with most common building materials such as concrete and brick. It is not designed to be used with materials that are not suitable for damp environments.

Care: After application and curing, the treated surface requires minimal maintenance. Avoid damaging the coating with sharp objects or aggressive cleaning methods.

Similar items

Natures Aid OptiGUT C - 120g Powder Vegan Gluten FreeFrom £15Isopon Fastglas Polyester Laminating Resin - U-POL - SSSRE-SMFrom £10API 5 In 1 Aquarium Test Strips - 25 PackFrom £10Ella's Kitchen Melty Sticks Baby Snack - Organic Sweetcorn and CarrotFrom £1Bioglan GLP-1 Support Powder Nutritional Blend - 355gFrom £23Silver Star Kiln Dried Sand - B&Q - 2591712From £17Nair Facial Brush On Hair Remover - Argan Oil 50mlFrom £5Bioglan Active Curcumin Tablets - 30 TabletsFrom £19Hydroxycut Weight Loss - 72 Rapid-Release CapsulesFrom £66Science Selective Skin and Coat Care Supplements - 100gFrom £4Safeguard Dryzone Fast Set Renovation Plaster - GreyFrom £40Allen & Page Small Holder Range Natural Free Range Layers Meal/Crumble - 20kgFrom £21

Price History

DatePrice
Visit shop