Blackmagic Design Converter - 12G SFP

SMPTE ST-2110 is a suite of standards for the transport of professional video and audio over managed IP networks. It enables uncompressed video, audio, and ancillary data to be sent point-to-point or through network switches.

Yes, you can use it with standard 10G Ethernet switches, either via Cat6 copper cables or optical fiber modules, as long as they support the necessary bandwidth and configurations for SMPTE ST-2110.

The SFP socket supports a range of optical modules, including 10G Ethernet, 3G-SDI, 6G-SDI, or 12G-SDI modules, offering significant flexibility for different transmission needs.

Yes, the converter supports PoE, allowing it to be powered directly from a compatible PoE-enabled Ethernet switch, simplifying cable management.

It supports SD, HD, and Ultra HD video standards up to 2160p60. This includes common formats like 720p, 1080i, and 1080p.

Yes, the unit features an LCD screen that displays live video monitoring of all inputs and outputs, alongside routing menus.

Please refer to the official Blackmagic Design documentation or your retailer for specific warranty information, as it can vary by region and purchase conditions.

Verify that the SDI input signal is active and within supported formats. Check that the SFP module is correctly seated and compatible. Ensure the IP network is properly configured and the device has network connectivity. Confirm power is supplied.

Check the quality and length of the SDI cable. Ensure the fiber optic connection is clean and secure. Verify network bandwidth and check for network congestion. Try reclocking the SDI output if available.

Ensure the headset is properly connected to the 5-pin XLR port. Check that the talkback button is functioning and volume control is adjusted. Verify talkback routing within the IP system.

Confirm the SFP module is functioning correctly. Check the IP address and subnet mask assigned to the device. Ensure the network switch is configured correctly for the VLAN or IP range being used.