Regatta Calderdale III Waterproof Jacket - Pink Potion - Size: 9-10

The Regatta Calderdale III is a waterproof and breathable shell jacket. It is designed to protect against rain and wind, but it does not provide significant insulation on its own. For cold weather, it should be worn over appropriate warm layers.

Isotex 10000 indicates a waterproof rating of 10,000mm, meaning it can withstand 10,000 millimeters of water in a one-inch column before water penetrates the fabric. It also has a breathability rating of 10,000g/m2/24hrs, meaning 10,000 grams of moisture vapor can pass through a square meter of fabric in 24 hours, keeping you dry from the inside out.

If water no longer beads up and rolls off the jacket's surface but instead soaks into the fabric, it's a sign that the DWR coating needs to be refreshed. You can use a DWR spray or wash-in product.

No, it is recommended to air dry this jacket. Tumble drying, especially at high heat, can damage the waterproof membrane and the DWR coating, compromising its performance.

The jacket features zipped pockets which offer good protection for items, but like most zipped pockets on outdoor jackets, they are generally considered water-resistant rather than 100% fully waterproof. For highly sensitive items, an additional dry bag inside the pocket is recommended in heavy rain.

The hood is a 'grown on' technical hood with a high collar and elastication, designed to provide a snug fit and good protection without extensive manual adjustment features found on some adult jackets.

The mesh lining helps improve comfort by creating a slight barrier between the outer fabric and your skin. This prevents the outer fabric from feeling clammy or sticking to your skin, especially when active, and aids in overall breathability and air circulation.

Ensure the DWR finish hasn't worn off; re-proof if necessary. Also, check that the jacket's breathability isn't overwhelmed by excessive layering or activity, as internal condensation can mimic leaks. Make sure all zippers are fully closed.

Clean any dirt or debris from the zipper teeth. Apply a zipper lubricant (like a silicone-based spray or wax) to the teeth to improve smoothness.

Gently wipe the reflective trims with a damp cloth to remove any accumulated dirt or grime that might be obscuring their reflective properties.