Multipanel Classic Bathroom Wall Panel - Riven Slate - 2400mm x 598mm

The primary advantage is the elimination of grout. This makes them quicker to install, easier to clean, and more hygienic as there are no grout lines to trap mold or mildew.

Yes, the Riven Slate finish can add depth and a natural element to any size bathroom. Its realistic replication of slate can make a bold statement.

Panels can be cut using a fine-toothed saw. For cut-outs (like for pipes), a jigsaw can be used. Always measure carefully and make cuts on the back of the panel where possible.

Multipanel recommends using their specifically formulated waterproof adhesive for best results and to maintain warranty coverage.

It is generally recommended to remove existing tiles to ensure a sound, flat surface for installation. However, if the existing tiles are firmly adhered and the surface is perfectly flat, some installers may proceed with appropriate preparation and adhesive.

The dimensions are 2400mm in height and 598mm in width.

Multipanel Classic bathroom wall panels come with a 30-year guarantee.

Ensure no debris is present in the groove or on the tongue. Check if the panel edge has been damaged during cutting. Trim away any obstructions gently.

Verify the wall surface is clean, dry, and free from dust or grease. Ensure the correct type and amount of adhesive have been used as per manufacturer guidelines. Allow adequate curing time.

The joint may not have been sealed properly. Re-apply sealant to the joint if necessary. If the Hydro-Lock connection is compromised, the panels may need to be removed and re-fitted with proper sealing.

You may be using a harsh cleaner or not rinsing thoroughly. Use only mild, non-abrasive detergents and rinse well with clean water, then dry with a soft cloth.