SmartSeal Patio ColourSeal - Red - 5L

It is suitable for most surfaces including precast concrete and other types of paving.

The first coat covers approximately 4m² per litre (dependent on the surface), and the second coat covers approximately 5m².

Yes, it is essential to thoroughly clean the area with SmartSeal Xtreme Cleaner before applying the sealant.

Yes, anti-slip granules can be added to the final coat for improved slip resistance.

It is recommended to apply two coats for optimal protection and color enhancement.

Allow the first coat to dry completely, following the product's recommended drying time. Refer to the product instructions for specific details.

Make sure you apply it evenly, and the first coat should be completely dry before applying the second. A third coat might be necessary to even the color out.

Ensure even application and that the first coat is fully dry before applying the second coat. Consider applying a third coat for more uniform coverage.

Ensure proper surface preparation. The surface must be clean and free of any previous sealants. Reapply the sealant following the application instructions.

Ensure the product is fully dry and cured. Check the porosity of the paving slabs; some may require more coats.