Samsung Anti-reflecting Film Protector - Galaxy S25+ - White

No, the Samsung Anti-reflecting Film Protector is designed to be ultra-thin and maintain the original touch sensitivity and responsiveness of your Galaxy S25+ screen.

While installing any screen protector requires patience and careful attention to detail to avoid bubbles and dust, the process is manageable. Following the step-by-step instructions provided will help ensure a successful application.

This film protector primarily guards against scratches, dust, dirt, and smudges. While it offers a basic layer of protection, it is not designed to absorb significant impact from drops in the same way a tempered glass protector would.

To remove, gently lift one corner of the film with your fingernail or a thin, non-abrasive tool. Once you have a corner lifted, slowly and steadily peel the film away from the screen. It should come off cleanly without leaving residue.

Yes, this film protector is designed to be case-friendly, meaning it should fit seamlessly with most standard phone cases without lifting at the edges.

Small bubbles often disappear within 24-48 hours. For larger bubbles, gently lift the nearest edge of the film with your fingernail or a credit card, push the bubble out with a squeegee, and then re-adhere the film. Be careful not to stretch the film.

This usually requires carefully lifting the film near the dust particle using a piece of sticky tape. Use another piece of tape to gently dab and remove the dust from the screen or the underside of the film. Re-apply the film slowly.

Ensure the screen edges were perfectly clean and free of oils or dust before application. Press down firmly on the edges with a squeegee or soft cloth. If the issue persists, the film might be slightly misaligned, or the adhesive could be compromised, requiring careful re-application or a new protector.

Over time and with heavy use, the anti-reflective coating can wear down. Ensure you are cleaning the screen gently with appropriate materials. If the issue persists significantly, it may indicate that the film needs to be replaced.