Draper Rotary Multi Tool Kit - 180W - 111 Piece

The product comes with a warranty as per Draper's standard terms. Please refer to your purchase documentation for specific details.

Always wear safety glasses or a face shield and gloves. Ensure the workpiece is securely held, and work in a well-ventilated area. Avoid wearing loose clothing or jewelry.

Unplug the tool. Use the spindle lock to hold the shaft. Unscrew the collet nut, remove the old accessory, insert the new one, and tighten the collet nut.

Yes, the tool can be used on metal, but select the appropriate accessory (e.g., grinding wheel, cut-off wheel) and use the correct speed setting.

The flex shaft provides greater flexibility and control, allowing for detailed work in hard-to-reach areas.

The tool has a variable speed control. Rotate the dial to increase or decrease the speed, matching the setting to the material and task.

Check the power supply and ensure the tool is properly plugged into a functioning 230V outlet. Inspect the cable for damage.

Ensure the correct accessory is selected for the task and that it is securely fastened. Check the speed setting to ensure it is appropriate for the material and task.

Check that the accessory is properly installed and not damaged. Reduce the speed setting if necessary. Ensure the workpiece is secured.