Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from loose paint, dirt, or grease. For previously painted surfaces, lightly sand and dust off. Unpainted wood or metal may require a primer suitable for exterior use.
Application: Stir the paint thoroughly before and during use. Apply two coats using a good quality brush or roller for best results. Allow adequate drying time between coats as per the product instructions.
Compatibility: This paint is specifically formulated for exterior wood and metal. It is not intended for use on masonry or interior surfaces.
Care: Clean application tools immediately after use with water. For maintaining the painted surface, wipe gently with a damp cloth and mild detergent if necessary. Avoid abrasive cleaners.