Black & Decker Wallpaper Stripper - KX3300T-GB

The Black & Decker KX3300T-GB can remove vinyl, multi-layered, painted, textured coatings, woodchip paper, lining paper, standard, blown coated paper, washable paper, embossed, velvet and hand printed wallpaper.

The heating time varies, but typically, it takes a few minutes for the unit to generate steam.

The water tank has a capacity of 4 liters.

The unit provides up to 60 minutes of continuous use on a full tank.

Yes, it features safety release valves and a boil-dry safety cut-out for protection. However, always use with proper ventilation and follow safety instructions.

The warranty period is 2 years.

Yes, the Black & Decker KX3300T-GB can be used on solid plaster walls, plasterboard, and dry walls.

After use, empty the tank, let it cool down, and store it in a dry place. The hose and steam plate have on-board storage.

Check the water level, ensure the unit is plugged in, and verify the power outlet is working. Check if the unit has reached the operating temperature. Ensure the hose is correctly attached.

Increase the steaming time or try a different angle on the steam plate. Ensure the steam plate is making good contact with the wall and try scoring the wallpaper with a wallpaper scorer before steaming.

Allow the unit to cool down. Check the water level and ensure the unit is not being used for an extended period without a break. Check that the safety release valve is functioning correctly.

Check all connections (hose, steam plate) and ensure they are properly sealed. Make sure the water tank is not overfilled. Check for any cracks in the tank.