Osmo Decking Oil - 5Ml

Reapplication is typically needed every 1-2 years, depending on weather exposure and wear.

Yes, but the old finish must be completely removed or compatible. Test in a small area first.

You'll need a brush or roller, clean cloths for wiping, and possibly sandpaper.

Allow several hours for the oil to penetrate the wood, and then wipe off the excess. The surface should be dry to the touch within 12-24 hours, but allow a few days for full cure.

Coverage varies based on the wood type and surface texture, but typically, a liter covers approximately 12 square meters with one coat.

Osmo Decking Oil is suitable for most types of wood commonly used for decking. However, it's always best to test it in a small, inconspicuous area first.

Clean your deck with a mild soap and water solution, avoiding harsh chemicals that may damage the finish.

Protect the deck from rain for at least 24 hours after application to allow the oil to properly penetrate and dry.

Ensure the wood is clean, dry, and properly prepared. Lightly sand if needed. If the wood is very dense, consider thinning the oil slightly.

Ensure even application. Wipe off excess oil. Sand lightly between coats.

Wipe off any excess oil after the recommended drying time. The oil may have been applied too thickly.

Ensure the oil is mixed well before application. Color variations may occur depending on the wood type and the number of coats applied.