Plasson Mechanical Compression Conversion Set - 25mm x 15mm

The Plasson Mechanical Compression Conversion Set is rated for PN16 pressure.

No, special tools are not required. The fitting is designed for easy, tool-free installation.

This fitting is designed specifically for connecting PVC pipes to galvanized copper pipes.

Yes, this fitting is WRAS approved and suitable for use in drinking water systems.

Ensure the pipe ends are clean and inserted correctly. Tighten the compression nut firmly, but avoid over-tightening. Test for leaks after installation.

Tighten the compression nut further. If the leak persists, disassemble the connection, inspect for damage, and reassemble, ensuring proper alignment.

Yes, it is approved for both coiled underground copper and straight length above ground copper.

This specific product is for 25mm x 15mm connections.

Ensure the compression nut is tightened sufficiently. Check for any debris or damage on the pipe ends or within the fitting. Re-tighten or replace the fitting if necessary.

Make sure the pipe ends are clean and free from burrs. Ensure the pipes are cut squarely. Use pipe lubricant to aid in the insertion process.

Check if the pipes are aligned correctly. Make sure the fitting threads are not damaged. Use a suitable wrench to tighten, but avoid over-tightening.

Check for any blockage within the pipe or fitting. Inspect the pipes and fittings for debris. Ensure the pipe size is appropriate for the system’s flow requirements.