Azpects EASYJoint Porcelain Jointing Compound Tub 15kg - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners and contractors looking for an easy-to-use, long-lasting jointing solution for porcelain paving. Azpects EASYJoint Porcelain offers a dry-application process, minimizing mess and maximizing ease of use. However, it's crucial to avoid using it in areas that are constantly wet. This guide will walk you through the key features, best practices, and troubleshooting for optimal results.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 8002 |
| Brand | Azpects |
Extended Product Information
FAQs
How much area does a 15kg tub cover?
Coverage varies based on joint size and paving dimensions. Refer to the product packaging for specific guidance.
Can I use EASYJoint Porcelain in areas that are constantly wet?
No, it is not recommended for areas with continuous water exposure.
How long does it take for EASYJoint Porcelain to fully cure?
Allow a minimum of 24 hours in dry conditions for the compound to cure fully.
Is any mixing required?
No, EASYJoint Porcelain is ready to use straight from the tub.
What tools do I need?
A broom or squeegee, a jointing tool or hand vibration tile beater, and a sprayer are recommended.
How do I store the remaining product?
Store any unused product in the original tub in a dry place, away from moisture.
What is the joint width range?
It is suitable for joints between 3mm and 13mm wide.
Can EASYJoint Porcelain be used on natural stone?
Yes, it can be used on various paving types in free-draining areas.
Troubleshooting
Jointing compound is not setting properly.
Ensure the area is dry during the setting process and that the minimum setting time of 24 hours is observed. Make sure the joints have been adequately compacted.
Excess compound remains on the paving surface after watering.
Remove excess compound before watering by sweeping the surface clean. Avoid overwatering the joints.
Product is difficult to sweep into the joints.
Make sure that the joints are dry and free from any debris. Use a stiff brush or squeegee to help work the compound into the joints.
Pros and Cons
Pros
- Easy dry application minimizes mess and simplifies the process.
- Creates strong, durable, and non-permeable joints.
- Suitable for a variety of paving types.
- Simple storage of unused product.
- Ready to use, saving time and effort.
Cons
- Not suitable for areas that are constantly wet.
- Coverage varies depending on joint size and paving.
- Requires dry conditions for proper setting.
- Requires a jointing tool or hand vibration tile beater for optimal compaction.
Setup, Compatibility & Care
- Preparation: Ensure the paving surface is clean and dry. Remove any existing jointing material and weeds.
- Application: Pour EASYJoint Porcelain over a manageable area and sweep it into the joints using a broom or squeegee. Make sure the joints are completely filled.
- Compaction: Lightly compact the compound using a jointing tool or hand vibration tile beater for optimal results.
- Watering: Once the joints are filled and compacted, use a sprayer to water the joints.
- Curing: Allow the joints to set in dry conditions for a minimum of 24 hours.
Compatibility:
- Works best with porcelain paving.
- Suitable for use with all types of paving slabs in free-draining areas.
Care:
- Avoid using in areas with constant water exposure.
- Store any remaining product in a dry place, sealed in the original tub.