Best current price£29.99from Scan Computers
Shopping.co.uk recommended and popular offers
Scan Computers£29.99Visit shop Montech Hs01 Reversible Mid Tower Pc Case Black Hs01 (B)
Visit shop
Amazon£56.26Visit shop Montech HS01, ATX Mid-Tower PC Case, Gaming PC, High Airflow, Reversible Layout, Mesh Front Panel, Sinking Design, Toolless Panels, Black
Visit shop8 offers from £29.99 - £115.98
View price history by clicking the chart icon.
1 offer from £59.99
View price history by clicking the chart icon.
The Montech HS01 PRO is an ATX Mid Tower PC case designed for builders prioritizing optimal cooling and a performance-driven aesthetic. Its key benefit lies in its advanced airflow system, offering efficiency comparable to open-frame designs. A potential caveat for some users might be the proprietary nature of some design elements related to its enhanced cooling, which requires specific component compatibility.
| Colour | Black |
|---|---|
| Model Part Number | HS01 Pro |
| Brand | Montech |
The HS01 PRO supports ATX, microATX, and Mini-ITX motherboards.
Yes, the HS01 PRO supports up to a 360mm AIO radiator in the top mounting location.
The case can accommodate up to 4 x 2.5" SSDs and 2 x 3.5" HDDs.
Yes, the HS01 PRO comes with 5 pre-installed GF120 V2 ARGB fans.
The maximum CPU cooler height supported is 175mm (6.89 inches).
Yes, the case features rotatable PCIe slots that enable easy vertical GPU mounting without an additional holder.
The Montech HS01 PRO comes with a 1-year warranty.
Yes, the HS01 PRO is designed to be compatible with back-connect motherboards, such as MSI Project Zero and ASUS BTF, for cleaner cable management.
Ensure the power supply unit is securely connected to the motherboard and wall outlet. Verify the front panel power switch is correctly connected to the motherboard headers. Check if the PSU is switched on.
Check that all case fans and CPU cooler are spinning. Ensure dust filters are clean and airflow is not obstructed by cables. Verify fan orientation for proper intake and exhaust. Consider adding more case fans or upgrading the CPU cooler/radiator.
Confirm the front panel USB headers are correctly plugged into the motherboard. Ensure the necessary drivers are installed for your motherboard chipset. Try plugging a known working USB device into the port.
Ensure the GPU length (420mm max) is within the case limit. If installing vertically, confirm the motherboard and GPU are compatible with the rotatable PCIe slots and that no other components obstruct the mount.
Compatibility: The HS01 PRO supports ATX, microATX, and Mini-ITX motherboards. It accommodates CPU coolers up to 175mm (6.89 inches) in height, graphics cards up to 420mm (16.54 inches) in length, and power supplies up to 200mm (7.87 inches) in length. It can house up to four 2.5" SSDs and two 3.5" HDDs.
Setup: Begin by installing the motherboard, ensuring it aligns with the standoffs. The reversible design can be configured before or after component installation by unscrewing the side panel and re-orienting the chassis. Install the power supply in the bottom-mounted bay. The rotatable PCIe slots allow for immediate vertical GPU mounting; ensure your GPU has adequate clearance and consider a riser cable if not included.
Care: Clean the exterior with a soft, dry or slightly damp cloth. Avoid abrasive cleaners. The dust filters, located at the bottom, should be removed periodically and cleaned with water or compressed air to maintain optimal airflow and prevent dust buildup. Ensure all fan and radiator mounts are free of obstructions.
Cooling Configuration: The case supports up to three 120mm fans at the top, front, and bottom, and two 120mm fans at the rear. Radiator support includes 120/240/360mm at the top, 120/240mm at the bottom, and 120mm at the rear.
