Farrow & Ball Exterior Eggshell Paint - White

No, this paint is specifically formulated for exterior use on wood and metal and should not be applied to interior surfaces.

Farrow & Ball Exterior Eggshell is designed to resist flaking, peeling, and fading for up to six years under normal conditions.

Surfaces must be clean, dry, and free from contaminants. Light sanding of glossy or weathered surfaces is recommended, followed by appropriate priming with Farrow & Ball Metal & Wood I.M. Primer & Undercoat or a suitable metal primer for bare metal.

'All White' is a pure white with no other pigments, creating a soft, sympathetic white that lacks the colder blue undertones often found in brilliant whites.

Clean gently with a soft, damp cloth. For tougher marks, use a mild detergent solution and rinse thoroughly with a damp cloth. Avoid abrasive cleaners.

Drying times vary based on conditions, but it is a quick-drying formula. Always refer to the product can for specific drying and recoating instructions.

This paint is designed for wood and metal. For plastic, ensure it is thoroughly cleaned, lightly abraded, and primed with a suitable plastic primer before applying Exterior Eggshell.

Ensure the surface was properly prepared, cleaned, and primed. Insufficient sanding or an inappropriate primer can cause adhesion problems. Ensure the surface is completely dry before application.

Apply paint evenly with a good quality brush or roller. Avoid applying too thickly or over-working the paint. Ensure adequate drying time between coats. Check environmental conditions; avoid painting in extreme temperatures or high humidity.

While the paint contains preservatives, heavy contamination may require a thorough clean with a fungicidal wash before repainting. Ensure good air circulation around the painted area.

This can be due to uneven application or insufficient coverage. Apply another thin, even coat, ensuring full coverage. Check if the surface was adequately primed.