Rust-Oleum Chalky Furniture Paint - Flint - 125ml

In most cases, no. Rust-Oleum Chalky Furniture Paint is designed for application directly onto surfaces without the need for priming or sanding. However, ensure the surface is clean and dry.

No, this paint is specifically formulated for interior use only. It is not designed to withstand exterior weather conditions.

For best results and longevity, it's recommended to protect the painted surface with Rust-Oleum Furniture Finishing Wax or Rust-Oleum Furniture Lacquer. Clean gently with a damp cloth. Avoid abrasive cleaners.

Stir the paint well before use. Apply in thin, even coats using a brush or roller suitable for chalk paint. Avoid overloading your brush to prevent drips and maintain a smooth finish.

The 125ml tin is suitable for small projects, touch-ups, or accent pieces. Coverage can vary depending on the surface porosity and application thickness, but it offers good coverage, often in one coat.

Drying times can vary based on humidity and temperature. Typically, it is touch-dry within an hour and can be recoated after 2-4 hours. Allow a longer period for full curing before heavy use.

For enhanced durability, especially on surfaces that will experience frequent contact or wear, Rust-Oleum recommends using their Furniture Finishing Wax or Furniture Lacquer over the chalky paint.

Stir the paint thoroughly. If still too thick, add a very small amount of water (a few drops) and stir well. Ensure you are applying thin, even coats.

This can occur if the paint is applied too thickly or not stirred adequately. Aim for thin coats and ensure the paint is well-mixed. Consider a light sanding if the finish is uneven once dry, and reapply a thin coat.

Ensure the surface is clean, dry, and free from grease or dust. While the paint is designed for minimal prep, extremely glossy or non-porous surfaces may benefit from a light scuff with fine-grit sandpaper.