Polycell Sealant Remover - 100ml

Store away from direct sunlight in a cool, dry place. Make sure the cap is tightly closed after use.

It is suitable for ceramic, enamel, plastic (test first), metal, and worktops.

Leave it for 10-15 minutes to allow the remover to penetrate the old sealant thoroughly.

Use an appropriate tool, such as a plastic scraper or a blunt blade, to avoid scratching the surface.

The product comes in a 100 ml bottle.

Yes, Polycell Sealant Remover is suitable for both indoor and outdoor use.

The minimum drying time is 0.17 hours (approximately 10 minutes), and the maximum drying time is 0.25 hours (approximately 15 minutes).

Wipe away excess Sealant Remover with a wet cloth immediately.

Ensure you have removed as much of the old sealant as possible with a blade first. Allow sufficient time for the remover to penetrate (10-15 minutes). You may need to repeat the process for stubborn sealants.

This is unlikely if used correctly. Ensure you are using the product on compatible surfaces. Always test on a small, inconspicuous area first, especially on plastics. If damage occurs, stop use immediately.

Shake the bottle well before use. Make sure the brush is clean and free of debris. Apply a liberal amount of the remover to the sealant.