Fluidmaster Click Seal Flexible Hose Connector - 300mm x 15mm x 1/2" - Chrome Brass

WRAS (Water Regulations Advisory Scheme) approval confirms that the product complies with the high standards set by water regulations in the UK, ensuring its suitability for use with potable water.

No, the Click Seal nut is designed for hand-tightening, making the installation tool-free.

This hose is designed for cold water applications. Using it with hot water could damage the hose and cause leaks.

This information is not available in the provided product data.

If the Click Seal does not click, ensure the nut is aligned correctly with the fitting. If it still doesn't click, try a different approach to ensure it properly seals. If issues persist, replace the hose.

The hose is 300mm long with a 15mm inlet and a 1/2" outlet.

Ensure the Click Seal nut is properly tightened until a click is heard. If the leak persists, check for any debris on the sealing surfaces and re-tighten. If the leak continues, replace the hose.

This model is 300mm in length. Check if a longer hose, such as the 500mm version, is needed.