SmartSeal Silk Imprinted Concrete Sealer - 25L

A 25L container covers approximately 100-150 square meters, depending on the porosity of the concrete and the application method.

For optimal protection and appearance, apply two coats of SmartSeal Silk Finish Sealer.

You can apply the sealer using a brush, roller, or sprayer. Ensure even coverage.

Allow the first coat to dry completely before applying the second coat. Drying times depend on weather conditions, but usually 2-4 hours.

While primarily designed for imprinted concrete, it can be used on other concrete surfaces. Always test on a small, inconspicuous area first.

Clean up spills immediately with a suitable solvent, such as white spirit, while the sealer is still wet.

The product offers a warranty against manufacturing defects; please refer to the product packaging for specifics.

Ensure the surface was completely dry before application and that the ambient temperature was within the recommended range. If the issue persists, consider applying a thin, even coat.

Ensure the surface was properly cleaned and prepared. Check for any contaminants. In some cases, light abrasion of the surface can help with adhesion.