DC-Fix Liva Leaf - Green

This film is designed to adhere to all smooth, non-porous surfaces. This includes painted wood, laminate, glass, metal, plastic, and smooth tiles. It is not suitable for rough, textured, or porous surfaces.

The film is water-resistant, making it suitable for areas like kitchens and bathrooms where splashes may occur. However, it is not designed to be submerged in water or used in applications requiring full waterproofing.

The d-c-fix Liva Leaf - Green film is heat-resistant up to 70°C (158°F). It can withstand typical room temperatures and moderate heat, but extreme heat sources should be avoided.

While designed for strong adhesion, careful repositioning may be possible during the initial stages of application if done gently. However, frequent adjustments can reduce the adhesive's effectiveness. Always aim for precise placement from the start.

The film is easy to clean. Use a damp cloth and a mild, non-abrasive household cleaner to wipe away dirt or spills. Avoid using harsh chemicals or abrasive materials that could damage the surface.

Yes, d-c-fix promotes sustainable furniture design. By upcycling existing furniture and decor, you can extend the life of your items and reduce the need for new purchases, making it an eco-conscious choice.

Ensure the surface is completely clean, dry, and smooth before application. Remove all dust, grease, and debris. If the surface is porous or textured, the film may not adhere properly.

During application, use a squeegee or soft cloth to smooth the film from the center outwards, pushing air bubbles to the edges. For stubborn bubbles, gently lift the film and re-apply, or carefully prick them with a pin and smooth the area.

If wrinkles form, gently peel back the section of the film to where it is smooth and re-apply slowly, ensuring even tension and using a smoothing tool. Do not pull too hard, as this can stretch the film.

Use a sharp utility knife and a straight edge (ruler or T-square) for precise cuts. The grid lines on the backing paper can serve as a helpful guide.

The film is heat-resistant up to 70°C. Avoid exposing it to temperatures above this limit or placing extremely hot items directly on the surface. Always use protective pads or coasters for hot objects.