Manfrotto Pump Cup - Flat Base

The 241FB is designed for smooth, flat, and non-porous surfaces such as glass, polished metal, tiles, or laminate.

No, the 241FB is specifically designed for lightweight photographic and video equipment. Using it with heavy gear is not recommended and could lead to failure.

The pump mechanism will become firm and difficult to operate when a sufficient vacuum has been created. Visually inspect that the cup is firmly seated against the surface.

The pump cup features a standard 3/8" male thread, compatible with most Manfrotto flat-base heads.

This depends on the surface and environmental conditions. For extended use or critical shots, it's advisable to check and re-pump periodically to ensure the vacuum remains strong.

The Manfrotto 241FB weighs approximately 620g.

While it can be used on damp surfaces if cleaned properly, prolonged exposure to water or very humid conditions may affect suction over time. Ensure the surface and cup are dry before application.

Ensure the suction cup and the mounting surface are completely clean and dry. Check for any scratches or damage on the cup's rim. Try pumping more vigorously to create a stronger vacuum.

This can happen on some surfaces or in varying temperatures. Re-pump the handle periodically to maintain vacuum pressure. Ensure the surface is truly non-porous.

Check for any obstructions or debris in the pump mechanism. Clean and lightly lubricate the moving parts if necessary, following manufacturer recommendations.

Verify that the camera and head weight does not exceed the product's intended capacity. Ensure the pump cup is securely attached and the camera head is properly tightened to the 3/8" thread.