Bestway Flowclear Sand Filter Pump - 2000 Gallons

Keep your above ground pool water clean and healthy with the Bestway Flowclear 2000 Gallons Sand F...

Best current price£229.00from Currys

One Offer

1 offer from £229.00

View price history by clicking the chart icon.

CurrysBestway 2200Gal Pool Sand Filter
Free delivery in 1–3 days
£229.00
Visit shop

Product Information

Full details

The Bestway Flowclear 2000 Gallons Sand Filter Pump is designed for above-ground pool owners seeking a reliable and cost-effective way to maintain clear, healthy water. Its primary benefit is the use of long-lasting silica sand as a filtering medium, reducing the need for frequent cartridge replacements. A potential caveat is that sand is not included and must be purchased separately. Key features include efficient filtration, a pre-filter basket for larger debris, an integrated ChemConnect dispenser for chlorine, and broad compatibility with most above-ground pools.

All features

Model Part NumberBW58499GB-25
BrandBestway

Extended Product Information

FAQs

What type of sand should I use with this filter?

The recommended sand is siliceous sand No. 20, with a grain size of 0.45-0.85mm. Approximately 20kg of sand is required. Polysphere filtration balls can also be used as an alternative.

How often do I need to backwash the filter?

You should backwash the filter when the pressure gauge indicates a rise in pressure (typically 8-10 PSI above the clean running pressure) or when you notice a decrease in water flow. This is usually needed every 1-4 weeks depending on pool usage and debris load.

How long does the sand last?

Silica sand typically lasts up to 3 years before it needs to be replaced. Polysphere filtration balls also have a long lifespan and are washable.

Does the filter come with sand?

No, the sand is not included with the Bestway Flowclear 2000 Gallons Sand Filter Pump and must be purchased separately.

How do I connect the ChemConnect dispenser?

The ChemConnect dispenser is designed to attach to the filter's outlet fitting. Follow the specific instructions provided with the dispenser for correct placement and tablet insertion.

Can this filter be used for in-ground pools?

This filter is specifically designed for above-ground swimming pools and is not recommended for in-ground pool applications.

What is the warranty period for this product?

Please refer to the product's warranty card or the manufacturer's official website for the most accurate and up-to-date warranty information, as this can vary.

Troubleshooting

Pump not turning on

Check if the pump is securely plugged into a functioning GFCI outlet. Ensure the power switch on the pump is in the 'on' position. Verify that the pool water level is sufficient to operate the pump.

Low water flow or pressure

Perform a backwash cycle to clean the sand. Check the pre-filter basket for debris and clean it. Ensure hoses are not kinked or blocked. Verify the sand level in the tank is correct.

Cloudy or dirty water

Ensure the pump is running for sufficient hours per day. Check and refill chlorine tablets in the ChemConnect dispenser. Perform backwashing and rinsing cycles. Test water chemistry and adjust as needed.

Pump making unusual noises

Turn off the pump immediately. Check for obstructions in the impeller or pump housing. Ensure the pump is securely mounted and not vibrating against any surfaces. If the noise persists, contact customer support.

Leaking from connections

Turn off and unplug the pump. Inspect all hose connections and tighten clamps. Check O-rings and seals for damage and replace if necessary.

Pros and Cons

Pros

  • Reduces ongoing costs by using sand instead of disposable cartridges.
  • Long lifespan for the filtering medium (up to 3 years for sand).
  • Integrated chlorine dispenser simplifies water maintenance.
  • Collects both fine debris and larger particles.
  • Easy to connect to most existing above-ground pool setups.
  • Promotes consistently clean and healthy pool water.

Cons

  • Silica sand is not included and needs to be purchased separately.
  • Requires approximately 20kg of specific grade siliceous sand.
  • Initial setup may require some assembly and understanding of connections.
  • May not be suitable for in-ground pools or very small kiddie pools.
  • Requires periodic backwashing to maintain optimal performance.

Setup, Compatibility & Care

Setup:

  1. Ensure the pump is placed on a stable, level surface near the pool and a GFCI-protected power outlet.
  2. Connect the hoses to the pool inlet and outlet, securing them with the provided clamps.
  3. Install the ChemConnect dispenser according to its specific instructions.
  4. Add the recommended amount (approx. 20kg) of appropriate grade siliceous sand (No. 20, 0.45-0.85mm) into the filter tank.
  5. Connect the pump to the filter tank and ensure all seals are secure.
  6. Prime the pump by filling the filter tank with water before initial operation.

Compatibility:

  • Compatible with most above-ground swimming pools ranging from 1100 to 54500 liters (300 to 14400 gallons).
  • Includes a 3.8cm (1.5in) pool valve adapter.
  • Works with Bestway's Polysphere filtration balls as an alternative to sand.

Care:

  • Backwashing: Periodically (when flow rate decreases or pressure gauge rises), turn the multi-port valve to the 'Backwash' setting to clean the sand. Follow the manufacturer's instructions for cycle duration.
  • Rinsing: After backwashing, turn the valve to 'Rinse' to resettle the sand before returning to 'Filter' mode.
  • ChemConnect Dispenser: Refill the chlorine tablets as needed and clean the dispenser regularly.
  • Sand Replacement: Replace the silica sand every 3 years or when filtration efficiency noticeably declines.
  • Storage: Clean the unit thoroughly and store it in a dry, protected area during the off-season.

Similar items

Price History

DatePrice
Visit shop