Mollor Wood Stain, 500g - Brown
Best current price£10.19from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£10.19Visit shop Wood Stain, 500g Water Based Wood Stain and Sealer in One - No Priming, No Top C
Visit shopeBay£10.19Visit shop All Offers
3 offers from £10.19 - £24.46
View price history by clicking the chart icon.
eBayWood Stain, 500g Water Based Wood Stain and Sealer in One - No Priming, No Top C
Free delivery in 1–3 days
£10.19
Visit shop
OnBuy.comMollor Wood Stain Water Based Multiple Finishes Wood Oil For Indoor And Outdoor Furniture Wood Paneling Cabinets And More Fast Drying Low Od 760472212379
Free delivery in 1–3 days
£19.62
Visit shop
Mollor Wood Stain Water Based Multiple Finishes Wood Oil For Indoor And Outdoor Furniture Wood Paneling Cabinets And More Fast Drying Low Od 760472212348Free delivery in 1–3 days£24.46Visit shop →
Product Information
Full details
The Mollor Wood Stain, 500g in Brown, is designed for DIY enthusiasts looking for a hassle-free way to restore and protect wood surfaces. Its primary benefit is the 3-in-1 formula, acting as a stain, primer, and top coat, simplifying the finishing process. A minor caveat is that achieving a deeper color requires multiple applications and waiting time between coats. This water-based stain is non-toxic, low-odor, and offers excellent water resistance and durability, making it suitable for both indoor and outdoor use.
All features
| Colour | Brown |
|---|---|
| Model Part Number | WoodStain-ML002-0.5KG-BRW |
| Brand | Mollor |
Extended Product Information
FAQs
Is this wood stain safe for indoor use?
Yes, the Mollor Wood Stain is non-toxic and has ultra-low VOCs, making it safe for indoor applications such as kitchen cabinets and furniture. Ensure good ventilation during application.
How many coats should I apply?
For a lighter shade, one coat is often sufficient. For a deeper, richer color, apply additional layers. Allow at least 4 hours of drying time between coats.
What is the best way to apply this stain?
Apply the wood stain with a clean cloth or a wood stain brush, working along the grain of the wood for the most even and natural-looking finish.
How long does it take to dry?
The stain achieves surface dryness and is ready for normal use in approximately 4 hours. Full optimal performance is reached within 7 days.
Can this stain be used on exterior wood?
Yes, its excellent water-resistant and sealing properties make it highly suitable for outdoor wooden floors, fences, and garden furniture.
What preparation is needed before applying the stain?
The wood surface should be clean, dry, and free from dust, grease, or old finishes. Light sanding might be necessary for best adhesion.
Does this product require a separate top coat?
No, this is a 'Wood Stain & Sealer in One' product, so no separate primer or top coat is needed.
Troubleshooting
Uneven color application
Ensure the wood is properly prepped and that the stain is applied evenly with consistent strokes along the grain. Wipe off excess stain within a few minutes of application if needed. For stubborn areas, light sanding and reapplication might be necessary.
Stain not drying properly
Check environmental conditions; high humidity or low temperatures can slow drying. Ensure adequate ventilation. Do not apply excessively thick coats, as this can inhibit drying. Allow more time if conditions are not optimal.
Color is lighter than expected
Apply additional thin coats, allowing adequate drying time between each layer. The longer the wait between coats, the deeper and richer the final color will be.
Surface feels sticky after drying
This can indicate an overly thick application or insufficient drying time. Try to gently buff the surface with a soft, dry cloth. If still sticky after 24-48 hours, a very light sanding might be needed, followed by a thinner reapplication.
Pros and Cons
Pros
- Simplifies the finishing process with its 3-in-1 formula.
- Suitable for a wide range of indoor and outdoor applications.
- Environmentally friendly with low VOCs and non-toxic composition.
- Provides excellent protection against moisture and UV damage.
- Durable and long-lasting finish.
Cons
- Achieving deeper colors requires multiple coats and waiting time.
- May require more careful application for an even finish compared to simpler stains.
- Optimal performance takes 7 days to fully develop.
Setup, Compatibility & Care
Preparation: Ensure the wood surface is clean, dry, and free from dust, grease, or old finishes. Light sanding may be required for optimal adhesion on previously finished surfaces.
Application: Apply using a clean cloth or a dedicated wood stain brush. Work along the wood grain for best results. For a lighter shade, apply a thin coat. For a deeper, richer color, apply additional layers after the previous coat has dried to the touch (at least 4 hours apart).
Drying: The surface will be dry to the touch in approximately 4 hours. Allow 7 days for the stain to fully cure and achieve optimal performance. Avoid heavy use or exposure to moisture during the curing period.
Compatibility: Suitable for various unfinished or previously finished wood surfaces. Test on an inconspicuous area first to ensure desired color and adhesion.
Care: Clean spills immediately with a damp cloth. For regular maintenance, dust regularly. Avoid harsh chemical cleaners, which can damage the protective finish.