Switzer 6.5HP Petrol Water Pump - 2 Inch
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Switzer 6.5HP Petrol Water Pump is designed for users needing to move large volumes of water quickly, such as farmers and gardeners for irrigation and drainage. Its primary benefit is a high flow rate of 500L/min, enabling efficient water transfer. A key consideration is its petrol engine, requiring fuel and maintenance.
All features
| Model Part Number | B685-038 |
|---|---|
| Brand | Switzer |
Extended Product Information
FAQs
What type of fuel should I use?
Use fresh, unleaded petrol. Refer to the engine's specific recommendations for octane rating.
How often should I check the oil?
Check the oil level before each use and top up as needed. Perform regular oil changes according to the manufacturer's maintenance schedule.
Can this pump handle dirty water?
The pump is suitable for clean or slightly silty water. Avoid pumping heavily contaminated water with large debris, as this can damage the impeller and reduce performance.
What is the maximum suction head?
The maximum suction lift is typically around 7 meters, but performance may vary based on conditions. Refer to the product manual for specific details.
How do I perform maintenance on the engine?
Regular maintenance includes checking and cleaning the air filter, checking the spark plug, and changing the engine oil. Always consult the engine's user manual for detailed instructions.
Is assembly required upon arrival?
Minimal assembly is usually required, typically involving attaching the hose fittings and adding fuel and oil. Refer to the included user manual for specific steps.
Troubleshooting
Pump not starting
Check fuel level, ensure spark plug is connected and clean, verify choke position, and check oil level.
Low or no water flow
Ensure the pump is properly primed, check for air leaks in the inlet hose, clear any blockages in the inlet strainer or hose, and verify the engine is running at the correct speed.
Engine runs but no water movement
The pump may not be properly primed. Try priming again. Check the impeller for damage or obstructions.
Excessive vibration
Ensure the pump is on a stable, level surface. Check that all connections are secure and that the impeller is balanced and free from debris.
Pros and Cons
Pros
- Moves large water volumes quickly (500L/min)
- Suitable for irrigation and drainage
- Portable, no electricity required
- Versatile 2-inch connections
- Robust for outdoor use
Cons
- Requires petrol fuel
- Needs regular engine maintenance
- Can be noisy during operation
- Emits exhaust fumes
- Manual starting required
Setup, Compatibility & Care
Setup:
- Ensure the pump is placed on a stable, level surface.
- Connect the 2-inch inlet and outlet hoses securely, ensuring no kinks.
- Prime the pump by filling the inlet hose and pump casing with water before starting.
- Add the appropriate grade of petrol to the fuel tank and check the oil level.
- Follow the engine start-up procedure as per the user manual.
Compatibility:
- Compatible with standard 2-inch water hoses.
- Suitable for clean or slightly silty water. Avoid pumping abrasive materials that could damage the impeller.
Care:
- After each use, clean the pump exterior with a damp cloth.
- Periodically check and clean the inlet strainer to prevent blockages.
- Perform regular engine maintenance, including oil changes and spark plug checks, as recommended in the user manual.
- Store in a dry, protected area when not in use.