Draper Open Frame Inverter Generator - 2.8kW

Ensure the fuel valve is open. Then, turn the on/off switch to 'on' and use the recoil start to pull the cord to start the engine.

The generator uses petrol.

Refer to the owner's manual for specific oil change intervals, but typically, change the oil after the first 20 hours of use and then every 100 hours or annually.

The generator offers a continuous run time of 5 hours at 100% load.

The generator has a circuit breaker. If overloaded, the circuit breaker will trip. Reduce the load by disconnecting some devices and then reset the breaker.

Contact Draper or your local Draper dealer for replacement parts, such as spark plugs, air filters, and oil filters.

Warranty information is not available in the provided product data. Please refer to the product documentation or contact the manufacturer for warranty details.

The noise level is 96dB(A).

Check the fuel level, ensure the on/off switch is in the 'on' position, and inspect the spark plug. If the engine still doesn't start, consult a professional.

Check the circuit breaker, and ensure that the devices connected are within the generator's power capacity. Check all connections and ensure they are secure.

Check the fuel and air filters for blockages and ensure the engine is properly maintained. Clean or replace the spark plug. If issues persist, contact a qualified technician.

Check the oil level. The generator has a low-oil shutdown feature. Refill the oil to the correct level.