You can apply this shed & fence treatment from the Cuprinol Less mess fence care range to colour a...You can apply this shed & fence treatment from the Cuprinol Less mess fence care range to colour and provide protection. It takes 2-4 hours to dry and will cover up to 5m² per litre on average. The treatment offers one coat coverage, easy application with less mess, and quick drying. It covers up to 4.8m2 per litre and has a drying time of 2-4 hours. Manufacturer: AkzoNobel.
B&Q - Less Mess Fence Care Rustic Brown Matt Exterior Shed & Fence Wood Paint5LFree delivery in 1–3 days£20.00Visit shop →
Product Information
Full details
This guide is designed for homeowners and gardeners seeking to protect and beautify their wooden fences and sheds. Cuprinol Less Mess Fence Care in Rich Oak offers a single-coat application, providing a rich color and protection against the elements. Note that the final color may vary slightly from the appearance in the tub, and proper surface preparation is key for optimal results.
All features
Colour
Brown
Model Part Number
5191662
Brand
Cuprinol
Extended Product Information
FAQs
How much area does one can cover?
A 5L can typically covers up to 5m² per litre, so a total of up to 25m², depending on the surface porosity.
How long does it take to dry?
It typically dries in 2-4 hours under normal weather conditions.
Can I apply it on smooth wood?
It is primarily designed for rough sawn wood. Smooth wood requires extra preparation for optimal results.
What should I do if it rains after I've applied the paint?
Avoid applying if rain is likely before the product has dried. If rain does occur, assess the damage and reapply after the surface has completely dried.
How do I clean my brushes after use?
Remove excess paint from the brush with a cloth, then wash with water.
Is it suitable for indoor use?
No, it is specifically designed for outdoor use on fences, sheds, and other garden wood.
What is the VOC content?
The VOC content is minimal (0 - 0.29%).
Where can I dispose of leftover paint?
Leftover product may be taken to a Community RePaint collection point.
Troubleshooting
Uneven Color or Coverage
Ensure the paint is thoroughly mixed before application. Apply an even coat, following the wood grain. A second coat may be necessary.
Paint is not drying
Check the weather conditions. Avoid applying in damp conditions or if rain is expected. Ensure the temperature is above 5°C. Check that the surface is clean and free of previous coatings.
Poor adhesion
Ensure the surface is properly prepared, clean, and free from any loose material or previous coatings. Test a small area first.
Pros and Cons
Pros
Single coat application saves time and effort.
Easy to apply, reducing mess and spills.
Quick drying time allows for faster project completion.
Water-based formula is environmentally friendly and easy to clean.
Provides a rich, attractive color to fences and sheds.
Offers good coverage per litre.
Cons
Color in the tub may appear different than the final result.
Requires proper surface preparation for optimal adhesion.
Not suitable for indoor use.
Performance may be reduced on weathered or grey smooth wood.
Application is not recommended in temperatures below 5°C or damp conditions.
Setup, Compatibility & Care
Setup
Preparation: Ensure the wood surface is clean, dry, and free from any existing coatings, mold, lichen, algae, or moss. Use a fungicidal wash if necessary.
Stir: Stir the paint thoroughly before use.
Test Area: Apply to a small, inconspicuous area to check the color and adhesion before starting the full project.
Application: Apply evenly along the grain using a brush. One coat is usually sufficient, but apply a second coat if a deeper color is desired, allowing 2-4 hours drying time between coats.
Compatibility
Suitable Surfaces: Primarily designed for rough sawn sheds, fences and other garden wood.
Not Suitable: Not recommended for smooth or weathered wood without proper preparation.
Temperature: Do not apply in temperatures below 5°C or in damp conditions.
Care
Cleaning Tools: Clean brushes and rollers with water immediately after use.
Storage: Store in a cool, dry place away from direct sunlight.
Disposal: Do not pour leftover paint down the drain. Unwanted paint can be taken to a Community RePaint collection point.