Shoe Storage Bench with Cushion and Flip-Drawer - Green

The HOMCOM shoe storage bench is designed to support a maximum load of 240 kg on its seat.

Yes, the middle divider inside each flip drawer is removable. You can remove these dividers to create taller compartments, allowing you to store boots, high heels, and other larger footwear.

The drawers are designed to accommodate shoes up to a maximum of UK size 10.5.

Yes, the shoe storage bench requires assembly. All necessary hardware and detailed assembly instructions are included in the package to guide you through the process.

For the bench frame, wipe it clean with a soft, damp cloth. Avoid harsh chemicals. For the linen-feel cushion cover, spot cleaning with a mild soap solution and air drying is recommended.

The bench measures 47.5 cm in height, 104 cm in width, and 26 cm in depth (47.5H x 104W x 26D cm).

Ensure all screws and fasteners are securely tightened. Double-check that all components are correctly aligned according to the assembly instructions. Sometimes, loosening and then re-tightening screws in sequence can help equalize pressure and stabilize the unit.

Verify that shoes are not overstuffed, especially at the back or top of the drawer, which can obstruct the closing mechanism. Check that the removable middle divider is properly seated and not causing any obstruction. Ensure there are no foreign objects inside the drawer runners.

Utilize the removable middle divider feature. Remove the divider in one or both flip drawers to create a taller, undivided compartment. This allows sufficient space for boots, high heels, or other larger footwear.

Always use a soft, damp cloth for cleaning the bench frame. Avoid abrasive cleaners, strong chemicals, or rough scrubbing pads, which can scratch or strip the finish. For the cushion, spot clean with a mild soap and water solution and allow it to air dry.