Mexco Premium Slotted Dry Diamond Core Drill Bit - 38 x 170mm
Cuts clean and accurate holes in bricks and blocks. Has 1/2 BSP female fitment. Use with diamond c...Cuts clean and accurate holes in bricks and blocks. Has 1/2 BSP female fitment. Use with diamond core drill adaptor hex shank (code 84790), or SDS shank (code 82224). 400mm cores enable penetration through a cavity wall without the need for an extension bar. Not to be used on hammer action. Cut clean and accurate holes in soft facing stone, bricks and blocks with this Mexco Premium Dry diamond core drill. High quality diamond segments and a welded, slotted barrel ensure all-round performance and fast waste removal. If you want to penetrate through a cavity wall without the need for an extension bar, this drill is also available in a 400mm length - sold separately. Cuts clean and accurate holes in bricks and blocks. Slotted barrel for faster waste removal. 1/2" BSP female fitment. High diamond concentration for all-round performance. Should be used with a minimum 850W drill motor fitted with slipping clutch. Not to be used on hammer action. Use with diamond core drill adaptor hex shank (code 84790) or SDS shank (code 82224). Also available in 400mm length - see products (code 24742), (code 29825) and (code 83566). Mexco Premium Slotted Dry Diamond Core Drill Bit 38 x 170mm. 1 x MEXCO Slotted Dry Core Drill X90 Grade 38mm. MEXCO Slotted Dry Core Drills offer fast drilling speeds and all round performance in masonry building materials due to the high quality diamond segments and welded barrels. MEXCO dry core drills should be used in conjunction with a minimum 850W drill motor fitted with a slipping clutch. Suitable for dry cutting. Length: 165mm, Fitment: " BSP Female.
This guide is for users of the Mexco Premium Slotted Dry Diamond Core Drill Bit, offering a fast and efficient solution for cutting clean holes in bricks and blocks. It provides all-round performance in masonry materials. Note that it should be used with a minimum 850W drill motor fitted with a slipping clutch and is not designed for hammer action.
All features
Model Part Number
MEXA10DC38
Brand
MEXCO
Extended Product Information
FAQs
What materials can I use this drill bit on?
This drill bit is designed for use on soft facing stone, bricks, and blocks.
What kind of drill motor do I need?
You need a minimum 850W drill motor fitted with a slipping clutch.
Can I use this drill bit with a hammer drill?
No, this drill bit is not designed for use with hammer action drills.
How do I attach the drill bit?
Attach the bit to the appropriate diamond core drill adaptor hex shank (code 84790) or SDS shank (code 82224), then secure the adaptor into the drill motor.
What does the slotted barrel do?
The slotted barrel facilitates faster waste removal, improving drilling speed.
Is this drill bit suitable for dry cutting?
Yes, it is designed for dry cutting applications.
Where can I find replacement parts?
Please contact the manufacturer or your local hardware store.
Troubleshooting
Drill bit is not cutting effectively.
Check the drill motor's power and ensure it meets the minimum 850W requirement. Also, verify that the drill bit is compatible with the material.
Drill bit is getting stuck.
Reduce pressure and allow the drill bit to cool. Clear debris from the slotted barrel.
Drill bit is wearing down quickly.
Ensure you are using the correct speed and pressure. Avoid excessive force, and check that the bit is properly cooled between uses.
Pros and Cons
Pros
Fast drilling speeds.
Suitable for dry cutting applications.
High-quality diamond segments ensure durability.
Compatible with a range of masonry materials.
Cons
Requires a minimum 850W drill motor.
Not suitable for use with hammer action drills.
May require specific adaptors.
Limited to use with masonry materials.
Setup, Compatibility & Care
Compatibility:
Requires a drill motor with a minimum power of 850W.
Compatible with diamond core drill adaptor hex shank (code 84790) or SDS shank (code 82224).
Not compatible with hammer action drills.
Setup:
Attach the core drill bit to the appropriate adaptor.
Secure the adaptor into the drill motor.
Ensure the drill motor's slipping clutch is properly set.