Offering a straightforward operation with great off-axis rejection and a smooth on-axis tone, the ...Offering a straightforward operation with great off-axis rejection and a smooth on-axis tone, the Audio-Technica AT875R Condenser Shotgun Microphone is a perfect recording device for TV shoots, indie films, documentary projects, and nature sounds. Its high sensitivity enables it to perform exceptionally well with a vast range of mic preamp classes. Its full-spectrum frequency response uses a gentle increase in high frequencies to improve intelligibility and make up for the loss in clarity caused by wind protection. It utilizes a supercardioid polar pattern and interference tube to attenuate rear-entry sound as well as reject lateral sounds. The AT875R microphone is manufactured from the best quality materials to ensure long-lasting use. It is durable yet lightweight, so it does not burden your camera or boom pole. It comes with a microphone clip for easy placement on a boom pole or mic stand. This high-performance microphone offers a narrow acceptance angle with its line + gradient design. It also features a smooth, natural-sounding on-axis quality and excellent off-axis rejection of sound arriving from the sides and rear. Requires phantom power. Designed for video production and broadcast (ENG/EFP) audio acquisition, its extremely short length (under 7 inches) makes it ideal for use with compact digital cameras and DV camcorders without adding noticeable heft. The tailored response minimizes camera handling noise.
The Audio-Technica AT875R is a compact condenser shotgun microphone designed for video production and broadcast audio acquisition. It offers excellent off-axis rejection and a smooth on-axis tone, making it ideal for film shoots, documentaries, and nature sound recording. Its primary benefit is its ability to capture clear audio with minimal background noise in demanding environments, though it requires phantom power to operate.
All features
Model Part Number
AT875R
Brand
Audio-Technica
Extended Product Information
FAQs
Does the AT875R require batteries?
No, the Audio-Technica AT875R does not use batteries. It requires +48V phantom power, which must be supplied by your connected audio device (mixer, recorder, etc.).
What is the main advantage of its short length?
Its extremely short length (under 7 inches) makes it ideal for use with compact digital cameras and DV camcorders, as it's lightweight and doesn't add noticeable heft or unbalance the camera setup.
How does the microphone reject off-axis sound?
The AT875R uses a supercardioid polar pattern and an interference tube design. This configuration effectively attenuates sounds arriving from the sides and rear of the microphone, allowing it to focus on the sound source directly in front.
What type of audio applications is this microphone best suited for?
It is specifically designed for video production and broadcast audio acquisition, including ENG (Electronic News Gathering) and EFP (Electronic Field Production). It's also excellent for indie films, documentaries, and nature sound recording where focused audio capture is needed.
Is a windscreen included with the microphone?
Yes, the AT875R comes with a windscreen to help reduce unwanted noise from air movement.
What is the frequency response range?
The microphone has a frequency response range of 90 Hz to 20,000 Hz.
Does it come with a carrying case?
Yes, a carrying case is included to help protect the microphone during transport and storage.
Troubleshooting
No audio output or very low signal
Verify that +48V phantom power is enabled and being supplied to the microphone. Ensure the XLR cable is securely connected at both ends. Check that the microphone is correctly selected as the input source on your recording device.
Excessive wind or handling noise
Ensure the included windscreen is properly attached. If recording in windy conditions, consider using a more robust windscreen or blimp. Handle the boom pole or camera gently to minimize mechanical vibrations transmitted to the microphone.
Hum or buzz in the audio
Check that the XLR cable is properly shielded and in good condition. Ensure all connected equipment shares a common ground or uses a balanced connection to minimize interference. Try a different XLR cable or input channel.
Distorted audio at normal speaking levels
The microphone's maximum sound pressure level (SPL) may be exceeded. Reduce the input gain on your mixer or recorder. Ensure the microphone is not placed too close to a very loud sound source.
Extremely compact and lightweight design, perfect for camera mounting.
Smooth, natural sound quality for clear dialogue and sound capture.
Durable construction ensures longevity in professional use.
Wide compatibility with various preamplifiers due to high sensitivity.
Cons
Requires phantom power, adding an extra connection/power requirement.
The narrow acceptance angle may require precise aiming for optimal sound.
Frequency response starts at 90 Hz, which may not capture very low-frequency sounds.
Not ideal for situations requiring a wide pickup pattern.
Setup, Compatibility & Care
Setup:
Connect the AT875R to your audio device (mixer, recorder, camera preamplifier) using an XLR cable.
Ensure your device is providing +48V phantom power to the microphone.
Attach the microphone to a boom pole, stand, or camera mount using the included clip.
If required, attach the included windscreen to reduce wind noise.
Position the microphone carefully, aiming it towards the sound source for optimal results.
Compatibility:
Power Source: Requires +48V phantom power, typically supplied by professional audio mixers, recorders, or dedicated phantom power supplies. Some cameras may offer phantom power through their XLR inputs.
Connectivity: Uses a standard 3-pin XLR connector.
Mounting: Compatible with standard microphone stands and boom poles.
Care:
Cleaning: Wipe the microphone body with a soft, dry cloth. Avoid using liquids or abrasive cleaners, which can damage the finish or internal components.
Storage: Store the microphone in its included carrying case when not in use to protect it from dust and physical damage.
Windscreen: Clean the windscreen gently with a damp cloth if it becomes soiled. Ensure it is completely dry before reattaching.
Handling: Avoid dropping the microphone or exposing it to extreme temperatures or moisture.