Gusset S2 Handlebars - 50mm

The 35mm clamp diameter increases the surface area where the handlebar meets the stem, leading to greater stiffness at the front of the bike. This results in more direct steering response and improved control, especially when cornering hard or riding technical terrain.

Yes, the handlebars feature cut markings that simplify trimming to a custom width. It is recommended to use a guide and a sharp cutting tool for a clean, straight cut, ensuring both sides are trimmed equally.

7075 alloy is a high-strength aluminum alloy known for its excellent strength-to-weight ratio. Gusset Components uses it in a custom butted and swaged form to create handlebars that are both stiff and compliant, reducing rider fatigue without compromising durability or control.

The rise affects your riding position. Higher rises (e.g., 30mm, 50mm) generally result in a more upright posture, beneficial for comfort and climbing. Lower rises (e.g., 10mm, 20mm) provide a more aggressive, lower profile, which can be advantageous for descending. Experiment or consult with a bike fitter to determine the best rise for your bike and preferences.

Yes, the Gusset S2 Handlebars are designed for riders who demand strength and control. Their robust 7075 alloy construction, 800mm width, and 35mm clamp make them well-suited for aggressive trail, enduro, and downhill applications.

Always refer to the torque specifications provided by your stem manufacturer. It is critical not to overtighten, as this can damage the handlebars or stem. A typical range might be 4-6 Nm, but always verify.

The 5° upsweep and 8° backsweep are designed to align with the natural angle of your wrists. This helps reduce strain and pressure points during long rides, contributing to greater comfort and endurance without compromising steering input.

Ensure stem bolts are properly torqued to spec. Verify that the handlebars are fully seated in the stem clamp. If the issue persists, the flex might be characteristic of the chosen rise or rider weight relative to the bar's intended use; consider a higher rise or stiffer setup if available.

Check stem bolt torque and handlebar seating. Ensure your headset is properly adjusted and has no play. A worn headset can mimic vague steering.

Adjust the angle of the handlebars in the stem to find a more natural position. Ensure brake levers and shifters are positioned ergonomically. Consider different grip types.

Utilize the different rise options available for the S2 handlebars. If the available rises do not meet your needs, consider stem spacers or a stem with a different angle, ensuring compatibility with the 35mm clamp.