Polypipe 110mm Soil Pipe - 3mtr Single Socket White

This Polypipe 110mm soil pipe is designed for residential soil and vent drainage systems, carrying waste from sanitary appliances to the main drain.

Yes, this single socket pipe is compatible with both push-fit ring seal and solvent weld joining methods, offering flexibility in installation.

It is designed to integrate with the comprehensive Polypipe PolySoil® range, including various fittings, connectors, air admittance valves, and fire protection sleeves.

This specific product is 3 meters in length.

The white finish provides a clean aesthetic integration in residential environments, while the material itself ensures durability and reliable drainage performance.

For push-fit, basic tools like a pipe cutter and lubricant may be needed. For solvent weld, you will need a pipe cutter, primer, and solvent cement.

The pipe has a diameter of 110mm, which is standard for most residential soil and vent applications.

Check if the joint was made correctly using the appropriate method (push-fit or solvent weld). Ensure the seal is properly seated for push-fit or that solvent cement was applied evenly and allowed to cure for solvent weld. Re-make the connection if necessary.

Ensure the pipe end and the fitting socket are clean and free of obstructions. Use silicone lubricant on the rubber seal for push-fit connections. If using solvent weld, ensure you are not attempting to force a misaligned joint.

This may indicate a blockage further down the system or an issue with ventilation. Check for obstructions in the pipe run and ensure any required ventilation components (like AAVs) are installed and functioning correctly.