BPC Fixings Mini Timber to Timber Joist Hanger - Silver - 47 x 67mm

The BPC Fixings Mini Timber to Timber Joist Hanger is designed for timber depths up to 100mm.

The joist hanger is made from 0.9 mm thick galvanised steel.

Yes, the galvanised steel construction provides corrosion resistance, making it suitable for both indoor and outdoor applications.

Use screws or nails that are suitable for the timber type and the intended load. Ensure they are of the correct size and material.

Position the hanger, align it with the timber, and secure it using appropriate fasteners. Ensure the timber surfaces are clean and level before installation.

The joist hanger is suitable for general timber-to-timber connections, but ensure that the load-bearing capacity is appropriate for your specific project.

Regularly inspect the hangers for any signs of damage or corrosion. Replace any damaged hangers immediately. Ensure that the fasteners remain tight and secure.

Check the timber dimensions and ensure the correct size of the joist hanger is being used. Make sure the timber is cut accurately and that there are no obstructions.

Ensure that the correct type and size of fasteners are being used. Check that the timber is suitable for the fasteners and that they are installed properly.

Inspect the surrounding environment for moisture. Replace the hanger if the corrosion is severe enough to compromise its structural integrity. Improve ventilation if necessary.