Godox AD800Pro Witstro Flash Head - 800W

You can expect approximately 300 full-power flashes per charge from the detachable lithium battery.

The Godox AD800Pro supports High-Speed Sync (HSS) up to 1/8000s.

Yes, the AD800Pro is compatible with Canon, Nikon, Sony, Fujifilm, Leica, Pentax, OM SYSTEM, and Panasonic cameras when used with the appropriate Godox X-series wireless transmitter.

It features a universal Bowens mount, allowing compatibility with a wide range of softboxes, beauty dishes, and other light modifiers.

The recycle time ranges from an ultra-fast 0.01 seconds to 1.5 seconds, depending on the power setting.

The 40W bi-color LED modeling lamp helps you visualize the effect of your lighting setup before taking the photograph. Its color temperature is adjustable from 2800K to 6000K.

Yes, the built-in 2.4G wireless X system supports control over 16 groups and 32 channels, making it easy to manage multiple flashes.

Check battery connection and charge level. Ensure the flash is powered on and not in standby mode. Verify the wireless trigger is properly synced and positioned within range. Test in manual mode to rule out TTL issues.

Ensure the battery is adequately charged. Check for any firmware updates. Clean the flash tube contacts if applicable. Avoid overheating by allowing the unit to rest between intensive use.

Confirm that the flash and trigger are set to the same channel and group. Check battery levels in both the flash and the trigger. Ensure the trigger is within the specified range of the flash unit.

Verify the modeling lamp setting is enabled and set to an appropriate brightness level. Check if the flash is in a power-saving standby mode, which may dim or turn off the modeling lamp. Ensure the modeling lamp is not overheated.