Rains Curve Jacket - Beige - XL

The jacket is made from Rains’ signature PU (polyurethane) fabric, known for its waterproof and windproof qualities.

The jacket is designed for a slightly shaped fit. It is recommended to consult the brand's sizing chart or consider your usual size. The provided description indicates it is cut for a figure-flattering fit.

Yes, the jacket is designed to accommodate layering. Depending on the thickness of the sweater, you may want to consider sizing up for a more comfortable fit, though the jacket is intended to fit well.

Yes, the hood features a tie cord, allowing you to adjust its fit to better protect against wind and rain.

For minor dirt, wipe the exterior with a damp cloth. For a full wash, use a cold, gentle machine cycle (30°C) with similar colors and hang to dry. Do not bleach, tumble dry, or iron.

Welded seams are created by fusing the fabric edges together, typically with a heat-sensitive tape or adhesive. This process creates a watertight seal, preventing water from penetrating through the stitching.

The product description does not explicitly mention vents. However, PU fabrics can sometimes be less breathable than natural fibers. For extended wear in warmer, humid conditions, this is something to consider.

Ensure all zippers and snaps are fully closed. Check that the hood tie cord is tightened. For persistent issues, seams might require professional attention if damage is suspected.

The belt is designed to be tied through belt loops. Ensure it is threaded correctly. If the material feels stiff, try adjusting it gently when the jacket is not being worn.

Gently pull the zipper up and down. If it continues to stick, use a graphite pencil tip to rub along the teeth of the zipper, or a small amount of wax. Avoid forcing the zipper.

This is uncommon with welded seams. If it occurs, inspect the seams for any damage. Minor issues may be resolved with a seam sealer designed for waterproof fabrics, but significant damage may require replacement.