Ryobi 18V ONE+ 150mm Circular Saw Kit - 4.0Ah Battery

The maximum cutting depth at a 90° angle is 45mm.

This circular saw is designed for wood and wood-like materials. It is not recommended for cutting metal.

With the included 4.0Ah battery, you can cut approximately 75 meters in 13mm plywood on a single charge. Actual run time varies with the application.

Yes, it is compatible with all Ryobi 18V ONE+ batteries, including higher or lower Ah capacities.

First, ensure the battery is removed. Use the spindle lock button to hold the spindle, then loosen the blade bolt with a wrench. Remove the old blade and install the new one, ensuring the teeth are facing the correct direction. Tighten the bolt securely.

Yes, this is a starter kit and includes the 18V circular saw, one 4.0Ah battery, and a charger.

Ensure the battery is correctly inserted and fully charged. Check for any debris blocking the battery contacts.

Check the depth of cut is appropriate for the material. Ensure the blade is sharp and correctly installed. Reduce cutting speed or use a different blade for denser materials.

Clean out the dust port and ensure a vacuum hose is securely attached if using one. Check for blockages in the vacuum cleaner.

Ensure the bevel lock knob is fully loosened. Inspect the adjustment mechanism for debris and clean if necessary.