Walplus 3D Tile Stickers Peel and Stick Backsplash - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and homeowners looking for a quick and cost-effective way to update their kitchen or bathroom. The Walplus 3D Tile Stickers offer a waterproof, oil-resistant, and heat-resistant solution for a fresh look in minutes. A key consideration is ensuring proper surface preparation and, for certain paint types, using an additional adhesive.
All features
| Colour | Green |
|---|---|
| Brand | Walplus |
Extended Product Information
FAQs
What is the coverage area of one package?
One package contains 20 pieces, covering approximately 0.85 square meters or 9.2 square feet.
Can these stickers be used in a shower?
While they are waterproof, prolonged direct exposure to shower water is not recommended. They are best suited for areas with occasional splashes, like backsplashes.
How do I cut the stickers to fit?
You can use standard scissors or a craft knife to trim and cut the stickers to your desired shape and size. A ruler can help ensure straight cuts.
Are these tiles removable?
They are designed for semi-permanent application. Removal may be possible but could potentially damage the underlying paint or surface, especially if applied with additional adhesive.
Can I apply these over existing tiles?
These stickers are best applied to a smooth, painted wall surface. Applying over existing tiles may not provide a smooth enough surface for proper adhesion.
What is the recommended surface for application?
The stickers adhere best to smooth, clean, and dry surfaces such as epoxy, glass, or well-painted walls. Avoid textured or porous surfaces.
How long should I wait after painting before applying?
It is recommended to wait at least three weeks after painting to allow the surface to fully cure and dry before applying the stickers.
Troubleshooting
Stickers not adhering well
Ensure the surface is clean, dry, and smooth. For latex-painted walls, apply a spray adhesive before placing the sticker. Ensure paint has fully cured before application.
Bubbles appearing after application
Carefully peel back the affected sticker and reapply, smoothing out the air bubbles with a soft cloth or squeegee. Ensure no dust or debris is trapped underneath.
Color mismatch with screen display
Order a sample if possible. Keep in mind that screen calibration can affect color perception. The actual product color may have slight variations.
Stickers peeling at the edges
Gently apply heat with a hairdryer on a low setting and press the edges down firmly. If the issue persists, consider using a suitable adhesive along the edges.
Pros and Cons
Pros
- Cost-effective alternative to traditional tiling.
- Quick and easy installation process.
- Waterproof and heat-resistant properties enhance durability.
- Ideal for renters or temporary renovations.
- Can be easily cut to fit specific dimensions.
Cons
- Color may vary slightly from screen display.
- May require additional spray adhesive on latex-painted walls.
- Not suitable for rough or uneven surfaces.
- Durability on heavily textured walls might be reduced.
- Requires at least three weeks of curing time for newly painted surfaces.
Setup, Compatibility & Care Instructions
Setup: Ensure the surface is clean, dry, and smooth. Wait at least three weeks after painting before applying the stickers. For walls painted with latex paint, applying a layer of spray adhesive is recommended for better adhesion.
Compatibility: Best suited for smooth, sealed surfaces such as epoxy, glass, or previously painted walls (allow paint to cure). Not recommended for unpainted or textured walls.
Care: Clean with a damp cloth. Avoid using abrasive cleaners that could damage the epoxy surface. Wipe away spills promptly to maintain the waterproof qualities.