Best current price£16.99from eBay
Shopping.co.uk recommended and popular offers
eBay£16.99Visit shop Grey Sand Slate Brick 3D Effect Wallpaper D-C-Fix Grey Bathroom Kitchen Vinyl
Visit shopeBay£20.99Visit shop Grey Blue Slate Brick 3D Effect Wallpaper D-C-Fix Grey Bathroom Kitchen Vinyl
Visit shop
B&Q£25.00Visit shop B&Q - Stone Wall Sand 67.5Cm X 4M 3D Wallpaper
Visit shop16 offers from £16.99 - £27.97
View price history by clicking the chart icon.
This D-C-Fix Grey Sand Slate Brick 3D Effect Wallpaper is designed for homeowners seeking a quick, easy, and modern update to kitchens and bathrooms. Its key benefit is providing a realistic slate brick look with a 3D effect, easily applied over existing surfaces like tiles, offering a significant visual upgrade without the hassle of retiling. However, success relies on thorough surface preparation, ensuring it is smooth, solid, dry, and clean.
| Colour | Grey |
|---|---|
| Model Part Number | F2701008 |
| Brand | d-c-fix |
No, this wallpaper is designed for smooth, flat surfaces. It should not be applied over raised or textured tiles, as this will prevent proper adhesion and affect the 3D effect.
The wallpaper can be cleaned at room temperature with a damp cloth. For best results and increased durability, especially in kitchen or bathroom environments, it is recommended to seal the surface with varnish.
Ensure the shower wall is smooth, clean, and dry. Apply the wallpaper horizontally, ensuring all edges and joins are sealed with waterproof silicone sealant. For maximum protection against water ingress, sealing the entire surface with a clear varnish is highly recommended.
To remove the wallpaper, carefully peel the PVC surface away from the support paper, starting from a corner. The remaining paper layer can serve as a base for new wallpaper or be removed completely.
For absorbent surfaces like plastered walls, use normal wallpaper paste applied to the reverse of the paper. For non-absorbent surfaces such as ceramic tiles, use a specific wallpaper glue and coat the wall before applying the paper.
Yes, the product features authentic printing and embossing to create a realistic 3D effect that mimics the appearance and feel of actual slate bricks.
This wallpaper is specifically designed for horizontal application to achieve a join-free finish, particularly on kitchen splashbacks. While technically possible, vertical application is not the intended use and may not yield the best aesthetic results.
Ensure the surface is clean, dry, and smooth. Reapply adhesive if necessary, using the correct type for the surface (paste for absorbent, specific glue for non-absorbent).
Smooth out air pockets immediately with a soft cloth or squeegee, working from the center outwards. If persistent, carefully lift the section and reapply.
Ensure strips are butt-joined precisely. Reapply adhesive to the edge of the lifting seam and press firmly. Seal edges with clear silicone sealant after drying.
Ensure the wallpaper surface has been properly sealed with varnish as recommended for high-moisture areas. Check that all edges and joins are securely sealed with silicone.
Surface Preparation:
Ensure the surface is smooth, solid, dry, and thoroughly clean before application. Remove any loose paint or wallpaper. If the surface is absorbent (e.g., plastered walls), apply normal wallpaper paste to the reverse of the paper and allow it to soak for 10 minutes. If the surface is non-absorbent (e.g., ceramic tiles), use a suitable adhesive and coat the wall before applying the paper.
Application:
Cut the wallpaper to the required size, allowing for slight overlap if necessary. Apply the paper, ensuring strips are butt-joined for a seamless finish. Carefully cut around obstacles like electrical sockets using scissors. If applying multiple strips, ensure they are precisely aligned edge-to-edge.
Sealing and Drying:
Seal all edges and joins using clear silicone sealant. Allow the applied wallpaper to dry completely for at least 24 hours before cleaning.
Compatibility:
Suitable for application on smooth, flat ceramic tiles, painted walls, hardboard, plywood, or shower walls. Avoid uneven surfaces such as raised tiles, wood panelling, and untreated damp walls.
Care:
Clean the surface at room temperature using a damp cloth. For enhanced durability and water resistance, sealing the surface with varnish is recommended.
