Danner Bull Run 6" boot - Black - UK 9

The break-in period for full-grain leather boots can vary but generally takes 1-2 weeks of regular wear. During this time, the leather will soften and mold to the unique shape of your feet for optimal comfort.

Yes, absolutely. The stitchdown construction method used for these boots allows them to be re-soled by a qualified cobbler, significantly extending their useful life.

For the oiled full-grain leather, it's best to use a high-quality leather conditioner or boot oil specifically formulated for oiled or rough-out leathers. This will help maintain its rugged finish, flexibility, and water resistance.

The full-grain leather provides natural water resistance. While they are not fully waterproof, they offer good protection against light moisture. For enhanced waterproofing, you can apply a suitable waterproofing spray or wax designed for leather.

EH protection means the soles and heels are designed to be non-conductive, providing a secondary source of protection to reduce the risk of electrocution in dry conditions where accidental contact with electrically energized objects might occur.

Regularly brush off dirt and debris with a stiff brush. For tougher grime, you can use a mild soap and water solution, scrubbing gently. Rinse thoroughly and allow the sole to air dry completely.

The 'D' width is considered a standard or regular width. If you typically wear wide sizes, you might find this width snug. It's recommended to try them on or consult Danner's specific sizing guide if you have wider feet.

Full-grain leather requires a break-in period. Wear them for short durations and use a quality leather conditioner to help soften the material and allow it to mold to your feet.

Ensure the sole is clean of debris or contaminants. The Danner Wedge Outsole is slip-resistant on most surfaces, but extreme conditions or specific chemicals can reduce grip. Evaluate your working environment and clean the sole regularly.

Regularly clean and condition the full-grain leather with a product specifically designed for oiled leather. This will restore moisture, protect the material, and maintain its distinctive rugged appearance.

This can sometimes be caused by friction between the tongue and laces, or a loose insole. Try applying a small amount of leather conditioner to the underside of the tongue. If the issue persists, check if the insoles are properly seated or try replacing them.

Inspect the eyelets for any sharp edges that might be cutting into the laces. If necessary, consider replacing the original laces with more durable, waxed laces designed for work boots.