Trimmable Thermal Blackout Roller Blinds - Black

Measure the width of your window recess precisely. Subtract 1cm to 2cm from this measurement to determine the final width of your trimmed blind, ensuring it fits within the recess with a small clearance on each side.

These blinds are designed to be trimmed for width. Trimming the length is not typically recommended and may affect the mechanism or appearance.

Please refer to the retailer's specific warranty information. Typically, window coverings have a limited warranty against manufacturing defects.

While they offer excellent privacy and light control, the fabric is not specifically designed for high-moisture environments like bathrooms. Use with caution and ensure adequate ventilation.

The child safety device typically involves a bracket that secures the pull cord or chain to the wall or window frame, keeping it out of reach of children.

Use a slightly damp cloth to wipe the surface. Avoid harsh chemicals or soaking the fabric, as this can damage the blackout coating.

Check that the blind is properly seated in its brackets. Ensure there are no obstructions in the window recess. Verify the fabric is not caught in the roller mechanism.

This can occur if the blind was not trimmed to the exact width required or if the window frame is uneven. Consider adding side channels or ensuring the blind is centered and fully extended.

Ensure you are following the specific instructions for the safety device. The cord should be taut but not overly tight. Check that the mounting points are secure.

Use a very sharp blade and a metal ruler for cutting. Allow the blind to hang for a few days; gravity may help the creases relax. If creases are severe, they may be permanent.