ForgeFix Screw Eyes - White - 10SE6514

Zinc plating is a process where a thin layer of zinc is applied to the screw eye. This layer acts as a protective barrier, preventing the underlying metal from rusting. It also provides sacrificial protection, meaning the zinc will corrode before the steel if the barrier is damaged, extending the product's lifespan.

While not strictly mandatory for all soft materials, drilling a pilot hole is strongly recommended, especially in timber. It makes installation much easier, reduces the force required, and significantly lowers the risk of splitting the wood or damaging the screw eye during insertion.

Yes, due to their zinc-plated finish, ForgeFix Screw Eyes offer increased resistance to corrosion and are well-suited for outdoor applications where they may be exposed to moisture and varying weather conditions.

They are designed to screw directly into timber and similar soft materials. For harder surfaces like brick, concrete, or plasterboard, they should be used in conjunction with appropriate wall plugs.

Each bag contains 10 ForgeFix Screw Eyes (ZP 65 x 14g).

'65' refers to the length of the screw eye in millimeters. '14g' refers to the gauge or thickness of the wire/screw, with 'g' standing for 'gauge'.

> Info needed: Specific load-bearing capacity information is not provided. These screw eyes are generally suitable for light-duty applications such as securing cables, wires, twine, and lightweight decorations, not for heavy loads or safety-critical applications.

This often indicates that the pilot hole is too small or has not been drilled. Ensure you drill a pilot hole with a diameter slightly smaller than the core of the screw's thread. This will ease insertion and reduce the risk of splitting.

The pilot hole might be too large, or the timber is too soft/damaged. If the pilot hole is too large, you may need to fill the hole and redrill, or consider using a slightly larger screw eye if available. For soft or damaged timber, using a wall plug designed for wood or a different mounting method might be necessary.

While zinc-plated, severe damage to the coating can expose the underlying metal. Check for deep scratches or impacts that may have compromised the zinc layer. The zinc's sacrificial protection means it corrodes itself to protect the base metal, so a fine white dust (zinc oxide) is normal and protective, but red rust indicates the base metal is exposed.