Jenolite Heat Resistant Paint - Matt Black - 500Ml

You can use this paint on metal, brick, concrete rendering, plaster, and other surfaces exposed to high temperatures.

This paint can withstand temperatures up to 650°C.

No, this paint is designed to adhere directly to the surface, but proper surface preparation is essential.

Clean the surface to remove rust, grease, dirt, and loose paint. Use a wire brush or sandpaper if needed.

The paint dries quickly, but the full curing time will depend on the specific conditions. Always refer to the product instructions for complete guidance.

Yes, this paint is suitable for automotive applications, including exhaust systems and engine parts.

Clean the painted surface with a damp cloth and mild detergent. Avoid abrasive cleaners.

The product comes with a 1-year guarantee.

Ensure the surface was properly prepared before painting. Remove loose paint, sand the surface, and reapply the paint, following the correct application steps.

Ensure the surface is clean and dry before applying the paint. Apply thin, even coats and allow each coat to dry fully before applying the next. Check the environment - high humidity can affect adhesion.

Apply thinner coats and ensure the previous coat is fully dry before applying the next one. Avoid applying paint in direct sunlight or very high temperatures.

Apply multiple thin coats rather than one thick coat. Ensure even coverage with each coat. Consider using a spray application for a smoother finish.