Hanworth Heather Eyelet Curtains - Purple

The product description focuses on the aesthetic design. Info needed: Specific details on lining type (e.g., blackout, thermal, unlined) are not provided in the current product information. For optimal light control or insulation, you may consider adding a separate blackout or thermal lining.

You will need a curtain pole that is wider than your window to allow the curtains to stack back effectively. The diameter of the pole should be smaller than the eyelet rings to ensure smooth operation, typically 28mm-35mm poles work well.

No, these are eyelet curtains, which are designed specifically for use with a curtain pole. They are not compatible with curtain tracks.

Always refer to the care label sewn into the curtains for precise instructions. Generally, machine wash on a gentle cycle at a low temperature (e.g., 30°C) and avoid harsh chemicals or bleach.

While quality dyes are used, prolonged exposure to direct sunlight can cause some fading over many years. Rotating curtains or using blinds/sheers during peak sun hours can help preserve the color.

Curtain panels are typically sold as a pair unless specified otherwise. This product's width (W 168cm) usually refers to the total width of both panels combined, or each panel if it's a very wide single panel. Info needed: Clarification on whether W 168cm is per panel or for the pair.

Yes, the product description mentions pairing with matching bedding for a full bedroom look. Look for Dreams & Drapes Hanworth Heather duvet sets, bedspreads, and other accessories.

Ensure the curtain pole is level. Re-thread the eyelets onto the pole, carefully arranging the fabric into consistent, even folds. You can gently train the fabric over a few days to hold the pleats better.

Check the curtain pole for any obstructions or rough spots. Ensure the pole diameter is appropriate for the eyelets. A silicone-based spray lubricant (ensure it's fabric-safe) can sometimes help, but generally, eyelets should glide easily on a smooth pole.

Lightly mist with water and allow to hang, or iron on a very low setting on the reverse side. Check the care label for specific ironing instructions. Do not iron directly on the printed side at high heat.