Best current price£12.94from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£12.94Visit shop Floplast Anthracite/Grey Mini Gutter Downpipe - 50Mm X 2Mtr
Visit shop
B&Q£38.78Visit shop B&Q - Miniflo Mini Gutter Downpipe 50mm X 2M Anthracite Grey.
Visit shop3 offers from £12.94 - £38.78
View price history by clicking the chart icon.
The FloPlast Mini Gutter Downpipe is an essential component for homeowners and contractors managing rainwater drainage on smaller structures like sheds, greenhouses, or summer houses. Its primary benefit is a streamlined, push-fit installation system that eliminates the need for messy solvents or chemical sealants, providing a clean and reliable finish. While highly effective for low-volume drainage, it is important to note that the 50mm diameter is specifically engineered for smaller roof areas and may not be sufficient for large residential roof surfaces.
| Model Part Number | RPM2AG |
|---|---|
| Brand | FloPlast |
While the Anthracite Grey finish is designed to be permanent, it can be painted if prepared properly with a suitable PVC primer and exterior-grade paint.
No. The system is designed as a push-fit solution. Solvents or glues are not required and may damage the PVC material over time.
No, this is a specialized 50mm Miniflo system and will not fit standard residential guttering components without specific, non-standard adapters.
A standard fine-tooth hacksaw is the best tool for the job. Always deburr the cut edge with a file afterward to protect the rubber seals in the fittings.
FloPlast products are manufactured with high-quality UV-stabilized PVC, which is designed to resist brittleness and color fading for many years.
Ensure the cut end is completely smooth and free of plastic burrs. A small amount of silicone lubricant can also assist if the fit is too tight.
Check that the pipe is fully inserted past the internal seals of the outlet. Ensure the pipe was cut perfectly square for an even seal.
Verify that you are using genuine FloPlast Miniflo 50mm fittings, as other brands may have slightly different tolerances.
Installation requires only basic tools such as a fine-tooth hacksaw for cutting to length and a file to deburr the edges. The pipe is fully compatible with the FloPlast Miniflo range, specifically connecting to Running Outlets and Stopend Outlets. To install, simply measure the required length, cut square, remove any burrs, and push firmly into the outlet or connector until fully seated. For care, it is recommended to perform a bi-annual inspection to ensure the system is free of leaves or debris, which can be easily flushed out with a low-pressure garden hose. Avoid using abrasive cleaning agents that could scratch the protective exterior finish.
FloPlast Ring Seal Soil Pipe - 110mm x 1.8mtr - Cast Iron EffectFrom £81
Wavin OsmaWeld - 40mm - Black - 3mFrom £13
FloPlast Waste Pipe - 21.5mm x 3mFrom £3
Push-Fit Waste Pipe - FloPlast - 40mm x 3m - WhiteFrom £6
Push-Fit Waste Pipe - 32mm x 3m - WhiteFrom £4
Osma Waste push-fit plain ended pipe - Black - 40mm - 3 MetreFrom £8
FloPlast Push Fit Waste Pipe - 40mm x 3m - GreyFrom £7
FloPlast Round Downpipe - 68mm x 5.5mtr BlackFrom £20
GoodHome Hard Surface Protector Roll - 20M L x 0.83M WFrom £22
Wavin Osma Push-Fit Waste Pipe - 40mm - 3m - WhiteFrom £8
Varnished Cold-Pressed Steel Round Tube - B&QFrom £6
Varnished Cold-Pressed Steel Round Tube - B&QFrom £10